[Mar 19, 2022] JN0-103 PDF Recently Updated Questions Dumps to Improve Exam Score [Q32-Q48]

[Mar 19, 2022] JN0-103 PDF Recently Updated Questions Dumps to Improve Exam Score

JN0-103 Dumps Full Questions with Free PDF Questions to Pass

Introduction to Juniper JN0-103: Junos, Associate (JNCIA-Junos) Exam

Juniper JN0-103: Junos, Associate (JNCIA-Junos) Exam is related to JNCIA-Junos Certification. This exam validates the Candidate knowledge and skills of networking fundamentals, core functionality of the Juniper Networks Junos OS.

Study Guides for JN0-103 Validation

These are the books for your use during JN0-103 exam revision:

• Day 1: Beginner’s Guide to Learning Junos

  This is a free study guide written by Martin Brown & others that you can easily download from a link on the Juniper Networks official page. It is written by a team of eight authors and covers the basics involved in Junos OS. It immerses itself into topics such as the Junos fundamentals, user interface, configuration basics involved in Junos, routing fundamentals, routing policies, filters for firewalls, and others. Such a book basically offers you a systematic way of working with Juniper networks and performing configuration as well as troubleshooting of the Junos OS and within a day, you will have captured what you need.

• Juniper Junos JN0-103 Real Exam Preparation

  This study book for the JN0-103 test has been done by Sure Help and brings helpful practice materials to candidates who need them. The questions in the practice tests have been developed to reflect the actual exam, which means when you carry out your practice using them, you will get to know what the final validation might be coming with. With this manual, you access a dependable way to check how much content you have grasped and whether it is the right one for the official test.

• Day 1: Exploring the Junos CLI

  A study guide like this for JN0-103 exam was written by Walter Goralski. It’s a popular guide for beginners who are just getting introduced to devices that run on Junos OS. By the way, the book can as well be used to refresh your knowledge concerning Junos OS when you are thinking about upgrading your skills. Some of the issues tackled by such a guide include navigating the operational mode for CLI as well as its configuration mode, modifying, saving, and loading arranging files while minimizing risk & concerning operations, using rudimentary commands for configuration, and utilizing the safety features available on the commit model for Junos OS.

• Junos OS for Dummies

  This JN0-103 test prep guide is presented in a way that makes it easy for a beginner to grasp the basics of Junos OS. The book’s authors include Walter J. Goralski, Cathy Gadecki, and Michael Bushong. It first explores the basics associated with Junos and takes you through the features related to it to ensure that you quickly pick and retain the knowledge of setting up, operating, and adding its key services. It further goes into tips that can help in rendering the network of your company to be more effective while revealing important cautions. Other things captured by such a book include the process of configuring default security characteristics for Junos, and a breakdown of advanced concepts to make it simple for you to grasp them gradually.

• Learning Junos OS from Zero to Learner

  This revision guide by Jawaid Iqbal starts with the fundamental concepts of Junos OS that include CLI structure as well as configuration and not forgetting troubleshooting. Also included are basics concerning products for Juniper. Those who study with such a book will get hold of knowledge on how to configure, verify, and troubleshoot one’s network in a procedural manner. The core aspect of the guide is in its ability to help a learner pass through the steps that are involved when configuring a typical OS for Junos.

NEW QUESTION 32
Which command displays all IPv4 routes in the default routing instance?

 show route table inet.0

 show route table inet.2

 show route table inet6.0

 show route table inet.1

NEW QUESTION 33
Which two statements are true regarding dynamic routing? (Choose two)

 Dynamic routing is used when absolute control of routing parameters is necessary

 Dynamic routing allows a device to automatically reroute traffic around a failure

 Participating devices dynamically learn routing information from each other

 Dynamic routing requires more administrative overhead than static routing

NEW QUESTION 34
Click the Exhibit button.
***Exhibit is Missing***
Referring to the exhibit, how many received packets are classified as exception traffic?

 20814681

 14442602

 12417

 27824

NEW QUESTION 35
You are connected to your Junos device using an SSH connection to the fxp0 interface. No other interfaces are currently configured beyond their default settings. You commit a configuration that makes the fxp0 interface unreachable from your management network.
In this scenario, how would you re-establish communication with the device?

 Connect to the console of the device.

 Establish an SSH connection to the loopback interface.

 Power off and power on the device.

 Unplug the network cable and plug it back in.

NEW QUESTION 36
Referring to the exhibit,
***Exhibit is Missing***
What will be the result?

 The device will boot in a multi-user mode at the configuration prompt

 The device will boot in a Single-user mode at the operational prompt

 The device will boot in a multi-user mode at the shell prompt

 The device will boot in a Single-user mode at the shell prompt

NEW QUESTION 37
Exhibit:

While working on a Junos Device, you receive the message shown.
In this scenario, what would you do to stop the shutdown process?

 Issue the clear system commit command

 Issue the clear system reboot command

 Issue the request system halt in command

 Issue the request system power-off in command

NEW QUESTION 38
Exhibit:

Which statement is true about the command shown in the exhibit?

 There needs to be a ; after top for the command to be accepted as a valid command.

 Only top should be used, no other options are allowed on the same line.

 The command shown in the exhibit would be accepted as a valid command.

 If you replace top with up command, it becomes valid.

NEW QUESTION 39
In your configuration, an interface contains multiple IP addresses belonging to the same subnet. You want to identify the IP address to use for packets sent to hosts on the same subnet. Which parameter would you use to accomplish this task?

 relative

 preferred

 primary

 patch

NEW QUESTION 40
You successfully established a BGP session with peer, but do not see any routes learned from the peer, What would cause this problem?

 A routing policy is blocking BGP from learning the routes

 Unicast reverse-path-forwarding is blocking BGP from learning the routes

 A security policy is blocking BGP from learning the routes

 The firewall filter is blocking the BGP from learning the routes

NEW QUESTION 41
Click the Exhibit button.

Referring to the exhibit, which action would synchronize the local router’s clock with the NTP server?

 Configure the correct NTP trusted key using the net trusted-key <key-value> configuration command under the [edit system ntp] hierarchy.

 Issue the set date ntp operational command.

 Configure the NTP server using the set boot-server 172.25.11.254 configuration command under the [edit system ntp] hierarchy.

 Reboot the router.

NEW QUESTION 42
Which two statements describe IPv4 default behavior for BGP? Choose Two

 All Active BGP routes are exported to configured EBGP neighbors

 All BGP routes are exported to configured EBGP neighbors

 All BGP routes are imported into the inet.0 routing table

 All BGP routes are imported into the inet4.0 routing table

NEW QUESTION 43
Referring to the exhibit,

what will be the result?

 The device will boot in single-user mode at the operational prompt.

 The device will boot into single-user mode at the shell prompt.

 The device will boot into multi-user mode at the shell prompt.

 The device will boot in multi-user mode at the configuration prompt.

NEW QUESTION 44
What will be the result?

 The device will boot in a multi-user mode at the configuration prompt

 The device will boot in a Single-user mode at the operational prompt

 The device will boot in a multi-user mode at the shell prompt

 The device will boot in a Single-user mode at the shell prompt

NEW QUESTION 45

Referring to the exhibit, which two statements are correct? (Choose two.)

 The memory utilization is 28%.

 The memory utilization is 72%.

 The 15 minute CPU load average is 99%.

 The CPU kernel utilization is 1%.

NEW QUESTION 46
What is the purpose of the discardaction of a firewall filter?

 The system silently drops the packet.

 The system evaluates the next term in the policy.

 The system drops the packet and logs the entry.

 The system drops the packet and sends an ICMP message.

Explanation/Reference:

NEW QUESTION 47
Click the Exhibit button.

What is the next hop for a packet destined to 192.168.80.98 as shown in the exhibit?

 192.168.11.2

 172.18.6.1

 172.25.11.254

 172.18.7.1

NEW QUESTION 48
Which two statements are true about the default behavior of Junos routing policies? (Choose two.)

 Routing policies can export active and inactive routes.

 Routing policies can export only active routes.

 Routing policies control the flow of routing information going to and from the routing table.

 Routing policies control the flow of routing information going to and from the forwarding table.

 Loading …

For more info visit:

Juniper JN0-103 Exam Reference

100% Updated Juniper JN0-103 Enterprise PDF Dumps: https://www.prepawaypdf.com/Juniper/JN0-103-practice-exam-dumps.html