[Mar 25, 2022] Get Free Updates Up to 365 days On Developing NCS-Core Braindumps [Q37-Q57]

4/5 - (2 votes)

[Mar 25, 2022] Get Free Updates Up to 365 days On Developing NCS-Core Braindumps

Best Quality Nutanix NCS-Core Exam Questions

How to prepare for Nutanix NCS-Core Certification Exam:

Preparing for the Nutanix NCS-Core exam is challenging but achievable if all preparation materials are used effectively. The following process should help guide you through your preparation efforts.

Read the appropriate sections in the Nutanix Knowledge Base (NKB). Read the notes, in the NKB, for each topic in your exam preparation material. If you have the time, practice the hands-on exercises that are provided with your exam preparation material. Log into your Exam Prep Software every day. Answer every homework question, follow the instructions for each exercise, and do each example exercise. Do all of your homework questions before you begin the hands-on training exercises. After you have completed all of your hands-on training exercises, take a post-deployment exam to verify whether, or not you understood what you learned in step 1. Test yourself daily by doing additional research on topics that are not included in your certification preparation material or that are still unclear to you.

Nutanix NCS-Core Exam Cover Topics

The NCS-100 covers the following topics:

Storage Management 25%
User Management 18.75%
Installation and Deployment 20%
Networking 20%

Difficulty in writing Nutanix NCS-Core Certification Exam:

The writing process for this exam is quite difficult because it covers not only installation and configuration of the NVP, but also the network, storage, user management, system compatibility, capacity planning of Nutanix systems, high availability of Nutanix systems, data management, encryption management of data at rest in Nutanix systems. It also covers best practices related to performance tuning. This section also includes how to create virtual machines with Nutanix systems. Nutanix NCS-Core Dumps will be very useful for you to pass the exam and get the certification. Achieve maximum performance from Nutanix systems when designing and creating these virtual machines.

NO.37 A customer buys ultimate licensing and wants to use the built-in Nutanix software encryption on their new AHV cluster. The customer needs to create three storage containers and asks the consultant to complete the process as fast as possible.
In which order should the cluster be deployed?

Create Cluster -> Install License Key -> Encrypt Cluster -> Create Storage Containers

Create Cluster -> Install License Key -> Create Storage Containers -> Encrypt Cluster

Create Cluster -> Encrypt Cluster -> Install License Key -> Create Storage Containers

Create Cluster -> Create Storage Containers -> Encrypt Cluster -> Install License Key

NO.38 An administrator knows that the disks in a cluster are out of date and a new firmware is available. For security reasons, these clusters do not have access to theInternet.
Which two steps must be completed to update the firmware? (Choose two.)

Configure LCM with a URL to access the firmware bundle.

Download a dark site bundle and stage it on an internal webserver.

Download the updated firmware .tgz file from the Nutanix portal.

Select Upgrade Software, then select disks and upload the updated firmware.

NO.39 A consultant is viewing an ESXi host via console without external network connectivity.
Which two IP addresses can be used to connect to the CVM (Choose two.)

192.168.5.253

192.168.5.2

192.168.5.254

192.168.5.1

NO.40 A consultant is setting up a new vSphere cluster. Customer requirements are as follows:
* VMs should automatically failover to another host if the host crashes
* Host CPU and Memory resources should be evenly balanced
* New VMs should be placed on the host with the most resources available Which two settings should be turned on to meet the requirements? (Choose two.)

vShpere DRS

vSphere HA

vSphere vMotion

vSphere Power Management

NO.41 Refer to the exhibit.

After performing ESXi to AHV conversion on a cluster, the alerts shown in the exhibit display on Prism. What should the administrator do to resolve this issue efficiently?

Remove the VMs. create a new Protection Domain, and add VMs to it

Remove VMs from the Protection Domain and add them back in.

Delete the Protection Domain, create a new Protection Domain, and add the VMs to it

Create a new Protection Domain and add the VMs to rt.

NO.42 An administrator is concerned that Prism will be inaccessible if Active Directory is unable to process logins.
Which method should the administrator use to access the cluster in the event of this type of outage?

Manage the cluster by using the “nutanix” user on the Prism leader CVM

Create and use an emergency local account on the cluster

Deploy an Active Directory server locally on the cluster

Manage the cluster remotely by downloading ncli to a remote workstation

NO.43 An administrator needs to configure snapshots for DRscenarios. The databases get refreshed on Friday nights regularly. The search service application re-indexes the new application on Saturday nights regularly. The remaining front-end and middle tier VMs are static but do get minor version updates weekly.
The administrator needs to have 2 weeks of daily snapshots for all the VMs in an app group and 2 weeks application consist local snapshots only on Fridays, Saturdays and Sundays on the same group of VMs.
Which two options should the administrator use to configure snapshots?

Create a schedule in a protection domain for all applicable VMs to snap daily with application consistency enabled with 6 days of retention and with no application consistency and 14 days local retention.

Create two consistency groups in a protection domain, one for front-end and middle tier apps with no application consistency, one for database and Search apps with application consistency, and apply the correct schedule to both groups.

Create one protection domain for all VMsin an application group with scheduled daily non-application consistent snapshots and another protection domain for all VMs in an application group with scheduled Friday. Saturday, Sunday application consistent snapshots.

Create a protection domain forall VMs

NO.44 A consultant is using the Foundation applet to create a cluster. During the process the consultant refreshes the progress bar web page and is concerned when nothing loads.
What should the consultant do to verify that Foundation has completed successfully?

Return to the Foundation configuration page and start over.

Update Java on the Foundation VM.

Connect to any CVM IP address from a web browser.

Restart the Foundation process.

NO.45 An administrator receives an alert in Prism indicating that interface eth2, on an AHV host is receiving many CRC errors. Aftertogging into the problematic host, the following command is run to show the indicated output:

What is causing this issue?

Incorrect link speeds on the switch

The interface is incorrectly configured with Jumbo Frames

A misconfigured bond

A physical layer network problem

NO.46 Refer to the exhibit.

An administrator is commissioning a Nutanix Enterprise Cloud. Once the user VMs have been deployed and are running, the administrator finds that VMs on the same host are able to communicate, but are unable to communicate between hosts.
What must be changed to enable full inter-VM communications?

Change the network the VMs are connected to

Change the spanning-tree port type on the switch

The VMs need to have static IPaddresses

Update the switch to specifically allow VLAN 15

NO.47 An administrator receives a notification that storage in a Nutanix cluster is unavailable. The cluster consists of five nodes and is configured with a Fault-Tolerance level of 1 (FT-1).
Upon investigation, the administrator finds the following:
* All AHV hosts are powered on and the CVMs are running
* Nodes A, B, and C are connected to one top of rack switch
* Nodes D and E are connected to a second top of rack switch
* The cluster status command run on Node A shows that CVM services on nodes D and E are down Which issue is causing the storage outage?

The default gateway for the CVMs and AHV hosts is down.

The switch connecting Nodes D and E is down.

The genesis process is down on both Nodes D and E.

Nodes D and E are inmaintenance mode.

NO.48 A consultant is unable to install virtualization software on a laptop.
Which two versions of Foundation can be used to resolve this issue? (Choose two.)

Foundation VM

Foundation Portable

Foundation Central

Foundation Applet

NO.49 A customer has a four-node cluster and is using Volume Groups toprovide storage services to a SQL cluster.
In the event of a CVM failure in the cluster, what is the expected IO path of the volume group’s iSCSI targets?

vDisk directed at failure CVM are redirected to Data Services IP until CVM is reconnected

vDisk directed to CVM that failed to disconnect and will not reconnect without manual intervention

vDisk directed to failed CVM are redirected to another CVM and automatically reconnect

vDisk directed at failed CVM will disconnect and reconnect when thefailed CVM comes back online

NO.50 A customer has a G6 AHV cluster with 4x10GbE NICs on each node and the following configuration:
* Networking is set to default
* Only two NICs are connected
The customer receives the following critical message:
The NIC is disconnected from the switch, or the switchport is failing.
What should the consultant verify to resolve the issue?

The NICs are configured for active-backup.

The VLANs are configured correctly on the switch or tagged on the cluster.

The other two 10GbE connections are removed from the default bond.

The NICs are connected for balance-slb.

NO.51 An administrator has an existing Nutanix seven-nodecluster running at RF2 that must be changed to have the following capabilities:
* RF3 set for the cluster
* Performance tier deduplication
What is the minimum memory needed on the CVMs to allow for these capabilities?

24GB

28GB

32GB

20G?

NO.52 An administrator is deploying an application using Nutanix Volumes. After configuring the volume group and connecting the guest’s iSCSI initiator to the volume group, they begin performance testing.
The administrator learns that performance on the virtual disk attached to the iSCSI initiator is far less than that of a virtual disk connected directly to the VM.
Which situation is causing this condition?

The VM’s iSCSI traffic is being routed to the data services IP subnet

The performance test is generating small block random 10.

The duster data services IP address is a bottleneck, shared with other iSCSI traffic

Data Locality ensures that VM attached disks are always faster than iSCSI volumes.

NO.53 An organizations Nutanix Cluster is based on VMware vSphere. The cluster is configured to download software updates automatically. The administration needs to verify and eventually upgrade VMware hypervisor via Prism Ul.
After logging in to Prism, the administrator receives the message shown:
No available versions for upgrade
What is causing the current state?

VMware support has expired, so downloads are not available.

vSphere binaries need to be manually uploaded.

The environment is running the latest vSphere version, so no update is required.

The cluster is unable to connect to reIease-api.nutanix-ccm:8D.

NO.54 A consultant is running Foundation. The cluster creation fails during the process. The host logs confirm that the nodes have been successfully imaged. The consultant decides to create the cluster manually.
Which command should the consultant use?

cluster -c IP_CVM_A, IP_CVM_B, IP_CVM_n

cluster create -s IP_CVM_A, IP_CVM_B, IP_CVM_n

cluster -s IP_CVM_A, IP_CVM_B, IP_CVM_n create_manual

cluster -s IP_CVM_M, IP_CVM_B, IP_CVM_n create

NO.55 An administrator is responsible for the following Nutanix Enterprise Cloud environment:
* A central datacenter with a 20-node cluster with 1.5PB of storage
* Five remote sites each with a 4-node cluster with 200TB storage
The remote sites are connected to the datacenter via 1GB links with an average latency of 6 ms RTT. What is the minimum RPO the administrator can achieve for this environment?

0 minutes

15 minutes

1 hour

6 hours

NO.56 A consultant successfully completes a Foundation using a flat switch. The consultant then works with the customer to move the cluster over to their production network. After the move, the CVMs and hypervisors can no longer communicate, which prevents the cluster from starting.
Which option should be used to resolve this issue?

If the IPMI is in use, check that the IPMI can ping the default gateway over IPv6.

Make sure that the IPMI and CVM VLAN is manually tagged on the Host and CVM.

Verify that IPv6 Link Local and DHCP is enabled on all switch ports.

If using VLANs, confirm the hypervisor/CVM VLAN is set as Native on the switch ports.

NO.57 The networking team makes changes to the Top of Rack switches to which the Nutanix cluster are attached. A few VMs are able to communicate with each other on the same node but are unable to connect to other parts of the network.
What is the likely cause of this issue?

The vNIC port is disconnected on the affected VMs.

There is a VLAN misconfiguration on the switch.

There is a VLAN misconfigurationon the VMs.

Jumbo Frame are misconfigured across ports.