DES-1241 Exam Dumps Pass with Updated Apr-2022 Tests Dumps [Q55-Q71]

Rate this post

DES-1241 Exam Dumps Pass with Updated Apr-2022 Tests Dumps

DES-1241 exam questions for practice in 2022 Updated 98 Questions

Training Courses for DES-1241 Exam

PowerStore offers new standards targeting storage infrastructure. Thus, the courses for DES-1421 avail a comprehensive set of topics to learners through videos, recorded demonstrations, as well as self-study materials. There are classes developed for Dell partners as well as customers. One of them is the PowerStore Installation & Maintenance course. It includes action-oriented labs and its delivery is on-demand. Other courses that support the DES-1241 exam preparation are PowerStore Concepts & Features; PowerStore Implementation; PowerStore Installation: Cabling; Basic Troubleshooting; PowerStore Maintenance; and PowerStore Upgrades. Those who benefit by following these programs are storage engineers, architects, administrators, as well as managers. Each course listed for DES-1241 focuses on the respective topic.

Understanding functional and technical aspects of DES-1241 Specialist – Platform Engineer, PowerStore Exam Troubleshooting

The following will be discussed in DELL DES-1241 exam dumps:

Troubleshooting with LEDs
Troubleshooting with PowerStore service scripts
Troubleshooting with PSTCLI
Performing PowerStore data collection
Troubleshooting with the PowerStore node service port
PowerStore hardware fault LEDs

NO.55 What is the last step when adding a drive to a Dell EMC PowerStore system?

Verify the new drive is seen

Add the drive to the pool

Backup the keystore

Zero the drive

Reference:
https://www.dell.com/support/manuals/pk/en/pkbsd1/powerstore-9000t/pwrstr-isg/install-a-25- drive?guid=guid-bddae51e-a561-4e84-bc0a-c2e99a43f033&lang=en-us

NO.56 Which account credentials are needed to run diagnostic commands?

root

service

console

admin

NO.57 While on-site installing a Dell EMC PowerStore T system, the node A embedded module management Ethernet port link LED is off. What does this indicate?

Network connection is established

No network connection is established

Port speed is 1 GB/s

Port speed is 10 GB/s

Explanation/Reference: https://www.dell.com/support/manuals/pk/en/pkbsd1/powerstore-9000t/pwrstr-isg/embedded- module-leds?guid=guid-bc07892c-75cf-43b6-8f17-8a4c49001aeb&lang=en-us

NO.58 Through which network do external hosts connect to the cluster for data access?

Management

ICM

ICD

Storage

Reference:
https://topics-cdn.dell.com/pdf/pwrstr-hcg_en-us.pdf

NO.59 While on-site troubleshooting a Dell EMC PowerStore system, the node B embedded module fault LED is blinking blue and amber alternating at one second intervals. What does this indicate?

Node is in degraded mode

Node is booting

Node is on service mode

System is not initialized

NO.60 A Storage Administrator notices a Major alert present in Dell EMC PowerStore Manager relating to data protection. What action within the alert details slide-out panel is helpful in troubleshooting the data protection problem?

View the Associated Events for earlier related alerts

Examine Notifications to obtain a list of corrective actions

Acknowledge the alert to clear and resolve the problem

Access the Repair Flow link to schedule a support engagement

NO.61 Which Dell EMC PowerStore network uses an appliance backplane?

ICD

MPIO

Inter-node

Inter-cluster management

Reference:
https://blocksandfiles.com/2020/05/05/dell-emc-powerstore-midrange-array-launch-analysis/

NO.62 What is the result of setting a VLAN ID of 0 on a network when running ICW for Dell EMC PowerStore?

Network will pass tagged traffic

Static route is set

Network will pass untagged traffic

Default route is set

Reference:
https://topics-cdn.dell.com/pdf/pwrstr-ntwk-plang_en-us.pdf (22)

NO.63 Which Dell EMC PowerStore model reserves the last two slots of the base enclosure for NVMe NVRAM?

3000

5000

7000

9000

Reference:
https://www.dellemc.com/en-us/collaterals/unauth/white-papers/products/storage/h18241-dell-emc- powerstore-best-practices-guide.pdf (9)

NO.64 What describes Dell EMC PowerStore X front-end cabling?

Uses internal VMware virtual switching and does not require a management network

Storage and management use the same LACP bonded cable connection

Uses VLTi data switch interconnectivity to support vMotion networks

Management and discovery use the same cables and connections as storage

“For PowerStore T model appliances, the individual ports within the system bond could be running in active/active mode or active/passive mode. This state depends on whether Link Aggregation Control Protocol (LACP) has been configured on the network switches. To ensure best resiliency and network performance, it is recommended to enable LACP on the network. For more information about configuring LACP for a PowerStore T model appliance, see the document PowerStore Guide for PowerStore T Models on the PowerStore Info Hub. For PowerStore X model appliances, there is no system bond and no LACP configuration is needed because the link aggregation and failover is handled by the virtual switches within the VMware hypervisor. “

NO.65 While on-site installing a Dell EMC PowerStore T system, the node A embedded module management Ethernet port link LED is off. What does this indicate?

Network connection is established

No network connection is established

Port speed is 1 GB/s

Port speed is 10 GB/s

NO.66 Which network is used for internal communication?

Intra-Cluster Data

Intra-Cluster Management

NAD Network

Inter-Node Network

NO.67 What does the command “svc_journalctl -f -g “st_io_monitor”” do?

Retrieves log messages from the specified error and watches for re-occurrence

Ignores log messages from the specified error and re-occurring errors

Rotates the log based on the specified error

Deletes all logs before the specified error

NO.68 What is the maximum number of base enclosures in a cluster when planning a Dell EMC PowerStore T installation?

Explanation/Reference: https://www.dellemc.com/en-us/collaterals/unauth/white-papers/products/storage/h18149-dell- emc-powerstore-platform-introduction.pdf

NO.69 What is a step in configuring the ToR data switches for a Dell EMC PowerStore T?

Configure a port for the discovery laptop

Create VLANs for NAS servers

Create VLAN for vMotion networks

Configure ports for management on native VLAN

NO.70 Under which condition does the Dell EMC PowerStore equipment in the rack require additional stability?

Low temperatures

Unstable humidity

Unstable environments

High temperatures

NO.71 What describes the SAS cabling when adding an expansion enclosure to a Dell EMC PowerStore, for each node and expansion enclosure side?

SAS cabling goes from existing A ports to new B ports. At the last enclosure, SAS cabling returns from the A ports to the originating node’s B ports

SAS cabling goes from existing A ports to new B ports. At the last enclosure, SAS cabling returns from the A ports to the alternate node’s B ports

SAS cabling goes from existing B ports to new A ports. At the last enclosure, SAS cabling returns from the B ports to the alternate node’s A ports

SAS cabling goes from existing B ports to new A ports. At the last enclosure, SAS cabling returns from the B ports to the originating node’s A ports

Loading …

Authentic DES-1241 Dumps With 100% Passing Rate Practice Tests Dumps: https://www.prepawaypdf.com/EMC/DES-1241-practice-exam-dumps.html

2022 Latest EMC DES-6332 Real Exam Dumps PDF [Q61-Q78]
[Q19-Q35] DES-DD33 Free Update With 100% Exam Passing Guarantee [2022]
Pass Your DES-1111 Exam Easily – Real DES-1111 Practice Dump Updated Jun 11, 2022 [Q35-Q53]
[Q31-Q52] Real EMC DEA-5TT1 Exam Questions [Updated 2022]

Training Courses for DES-1241 Exam

Understanding functional and technical aspects of DES-1241 Specialist – Platform Engineer, PowerStore Exam Troubleshooting

Related posts:

admin

You might also like

Leave a Reply Cancel reply