2022 100% Free 350-401 Daily Practice Exam With 442 Questions [Q128-Q148]

NEW QUESTION 128
An administrator must enable Telnet access to Router X using the router username and password database for authentication. Which configuration should be applied?
A)

B)

C)

D)

Option A

Option B

Option C

Option D

NEW QUESTION 129
When reason could cause an OSPF neighborship to be in the EXSTART/EXCHANGE state?

Mismatched OSPF network type

Mismatched areas

Mismatched MTU size

Mismatched OSPF link costs

NEW QUESTION 130
Which NGFW mode block flows crossing the firewall?

Passive

Tap

Inline tap

Inline

NEW QUESTION 131
Which method displays text directly into the active console with a synchronous EEM applet policy?

event manager applet boom
event syslog pattern ‘UP’
action 1.0 gets ‘logging directly to console’

event manager applet boom
event syslog pattern ‘UP’
action 1.0 syslog priority direct msg ‘log directly to console’

event manager applet boom
event syslog pattern ‘UP’
action 1.0 puts ‘logging directly to console’

event manager applet boom
event syslog pattern ‘UP’
action 1.0 string ‘logging directly to console’

NEW QUESTION 132
Drag and drop the DHCP messages that are exchanged between a client and an AP into the order they are exchanged on the right.

NEW QUESTION 133
Drag and drop the REST API authentication methods from the left onto their descriptions on the right.

NEW QUESTION 134
An engineer creates the configuration below. Drag and drop the authentication methods from the left into the order of priority on the right. Not all options are used.

NEW QUESTION 135
Drag and drop the characteristics from the left onto the infrastructure types on the right.

NEW QUESTION 136
What is the purpose of the LISP routing and addressing architecture?

It creates two entries for each network node, one for Its identity and another for its location on the network.

It allows LISP to be applied as a network visualization overlay though encapsulation.

It allows multiple Instances of a routing table to co-exist within the same router.

It creates head-end replication used to deliver broadcast and multicast frames to the entire network.

NEW QUESTION 137
Which JSON syntax is valid?

Option A

Option B

Option C

Option D

NEW QUESTION 138
What is a fact about Cisco EAP-FAST?

It does not require a RADIUS server certificate.

It requires a client certificate.

It is an IETF standard.

It operates in transparent mode.

NEW QUESTION 139
Refer to the exhibit The network administrator must be able to perform configuration changes when all the RADIUS servers are unreachable. Which configuration allows all commands to be authorized if the user has successfully authenticated?

aaa authorization exec default group radius none

aaa authentication login default group radius local none

aaa authorization exec default group radius if-authenticated

aaa authorization exec default group radius

NEW QUESTION 140
What is the difference between the enable password and the enable secret password when service password encryption is enable on an IOS device?

The enable password is encrypted with a stronger encryption method.

There is no difference and both passwords are encrypted identically.

The enable password cannot be decrypted.

The enable secret password is protected via stronger cryptography mechanisms.

NEW QUESTION 141
Which JSON syntax is valid?
A)

B)

C)

D)

Option A

Option B

Option C

Option D

NEW QUESTION 142
Refer to the exhibit.

Which command must be applied to Routed to bring the GRE tunnel to an up/up state?

Router1(config)#interface tunnel0

Router1(config-if)#tunnel source GigabitEthernet0/1

Router1(config-if)#tunnel mode gre multipoint

Router1(config-if)#tunnel source Loopback0

NEW QUESTION 143
A client device roams between access points located on defferent floors in an atrium. The access points joined to the same controller and configuration in local mode. The access points are in different IP addresses, but the client VLAN in the group same. What type of roam occurs?

inter-controller

inter-subnet

intra-VLAN

intra-controller

NEW QUESTION 144
How does SSO work with HSRP to minimize network disruptions?

It enables HSRP to elect another switch in the group as the active HSRP switch.

It ensures fast failover in the case of link failure.

It enables data forwarding along known routes following a switchover, white the routing protocol reconverges.

It enables HSRP to failover to the standby RP on the same device.

NEW QUESTION 145
In an SD-Access solution what is the role of a fabric edge node?

to connect external Layer 3- network to the SD-Access fabric

to connect wired endpoint to the SD-Access fabric

to advertise fabric IP address space to external network

to connect the fusion router to the SD-Access fabric

NEW QUESTION 146
Refer to the exhibit.

Only administrators from the subnet 10.10.10.0/24 are permitted to have access to the router. A secure protocol must be used for the remote access and management of the router instead of clear-text protocols. Which configuration achieves this goal?

Option A

Option B

Option C

Option D

NEW QUESTION 147
A customer has several small branches and wants to deploy a WI-FI solution with local management using CAPWAP. Which deployment model meets this requirement?

Autonomous

Mobility Express

SD-Access wireless

Local mode

NEW QUESTION 148
Drag and drop the LISP components from the left onto the function they perform on the right. Not all options are used.