[May 19, 2022] PrepAwayPDF JN0-1362 Exam Practice Test Questions (Updated 130 Questions) [Q25-Q43]

[May 19, 2022] PrepAwayPDF JN0-1362 Exam Practice Test Questions (Updated 130 Questions)

Pass Juniper JN0-1362 Exam Info and Free Practice Test

Objective of Juniper JN0-1362 Certification:

The objective of the Juniper JN0-1362 Certification exam is to assess the knowledge and skills of candidates in regards, to the necessary Juniper Networks product knowledge and test their ability to use those skills for performing common and complex design and troubleshooting tasks. Juniper JN0-1362 exam dumps PDF exam questions and answers are also intended to assure the IT professionals that they have the necessary skills and knowledge for accomplishing tasks related to implementing and managing Juniper Networks products. The exam contains a variety of questions that will test your understanding of all fields concerned with network design and troubleshooting. Accurate knowledge is the key to this certification, and it is followed by excellent experience. This section of the Juniper JN0-1362 certification exam tests for your knowledge of MPLS-based VPNs. This section of the Juniper JN0-1362 certification exam tests for your knowledge of intrusion detection and prevention technologies. The subject of Intrusion Detection and Prevention occurs in two parts, the basics of IDS/IPS and IPS device implementation. In addition to these topics, you will also get a section on web application security.

The subject of MPLS occurs in two parts, one being the basics of the protocol and the other being an understanding of how it operates in a network. The Juniper JN0-1362 Certification exam in this section covers concepts associated with BGP, LDP, LDPv2, PIM/DMVPN, Cisco’s implementation of LDP, IPRS, and IETF on MPLS. The Juniper JN0-1362 certification exam in this section covers an understanding of BGP configuration, peer relationships, and basic security features. Candidates preparing for the Juniper JN0-1362 certification exam should have a thorough knowledge of the Message Header Field (MHF) and TCP MHF, configuring BGP to use TCP as transport protocol, BGP configuration for the IPv4 and IPv6 address families, Basic configurations on BGP’s trace options and troubleshooting. The Juniper JN0-1362 certification exam in this section covers an understanding of OSPF and its feature and configuration options. Candidates should have an understanding of the OSPF status codes, address family issues, OSPF signaling for IPv4 and IPv6 address families. Candidates taking the Juniper JN0-1362 test should also be aware that OSPF version 2 is included as part of the exam.

Juniper JN0-1362 Exam advantages:

The Juniper JN0-1362 Certification exam provides you with numerous advantages. After clearing the exam successfully, you can receive accreditation for your skills and knowledge, which will help you enhance your career qualification. This certification has the potential of giving you an edge over others in your area of expertise. It is also a certificate that will help you showcase to the world what you are capable of achieving. Helping you gain a better understanding of how to perform tasks and the know-how required in networking is what will help you get a better job. Juniper JN0-1362 exam dumps is a medium that can be used to gauge your understanding of how to design, implement and manage network systems.

NO.25 Your customer is deploying a multitenant data center and needs help with the WAN edge design.
What are two mam design considerations for this environment? (Choose two.)

 control plane redundancy

 NAT requirements

 unified threat management

 Virtual Chassis Control Protocol

NO.26 You are designing a solution for a company with a central office with several branch locations geographically dispersed. You are given the following requirements:
– provides a different bandwidth at each location,
– has any-to-any connectivity,
– offloads some network responsibility.
– is inherently isolated.
– has a simple network design.
Which statement satisfies these requirements?

 Implement WAN over the public Internet.

 Implement Layer 3 VPN services at each location

 Implement Layer 2 VPN point-to-point circuits from each location to the central office.

 Implement services on a mesh of dark fiber between each location

NO.27 You are responding to an RFP for a services provider that wants to upgrade their MPLS/LDP network to use traffic engineering.
Which two statements are correct in this scenario? (Choose two )

 Segment routing requires a controller for bandwidth reservations

 Segment routing uses LDP for label adjacency making it backward-compatible with LDP.

 RSVP-TE requires a controller for bandwidth reservations.

 RSVP-TE creates session states on core routers.

NO.28 You want to migrate your network from using Draft-Rosen to multicast VPN, Due to functional similarities, it will help operations personnel make the transition if they are familiar with certain technologies In this scenario, which technology would be helpful?

 hierarchical VPLS

 Layer 3 VPNs

 Layer 2 VPNs

 VPLS with point-to-multipoint LSPs

NO.29 You are implementing an MPLS-based WAN environment to connect remote sites to the corporate headquarters (HQ) However, the service provider at the HQ location does not provide service at the location of one of the remote sites.
Which statement is true in this scenario?

 A dedicated leased line will need to be used to connect to the remote site.

 A circuit can be bridged across multiple service providers for end-to-end connectivity.

 A public WAN circuit can be provisioned over the Internet that will provide the same level of service.

 A hub site in a location where both service providers have a presence will need to be deployed.

NO.30 You are designing the physical redundancy for a service provider network and are checking for potential risks due to fate sharing.
Which two sources of fate sharing should you examine in this scenario? (Choose two.)

 hardware vendor

 MPLS LSP

 building location

 fiber conduit

NO.31 Click the Exhibit button:

Referring to the exhibit, which mechanism is used to advertise routes from the enterprise network to the service provider network?

 BGP flowspec

 BGP export policies

 BGP import policies

 firewall filters

NO.32 You are designing a new SDN WAN solution for a large enterprise MPLS backbone. The existing customer network has some LSPs in place that were manually provisioned. The customer requires that the solution provide for complete LSP life cycle management. You are considering the NorthStar Controller as pan of the design.
Which two LSP types would be managed in this scenario? (Choose two )

 PCC administered

 PCE administered

 PCE controlled

 PCE delegated

NO.33 You are working on a multi-Data Center interconnect (DCI) solution. Your WAN is based upon a multipoint MPLS Layer 3 VPN. This design must provide Layer 2 connectivity between the data centers across your WAN.
Which technology would satisfy the requirement?

 VRRP

 VCF

 RTG

 EVPN

NO.34 A customer requests that you design their Layer 3 VPN solution so that all site-to-site traffic goes through a central site, in a hub-and-spoke fashion You must choose between using one or two interfaces on the hub WAN link.
In this scenario, which solution would you use?

 Use two interfaces on the hub WAN link to allow traffic to go from the spokes to the hub on one interface and from the hub to the spokes on the other interface.

 Use two interfaces on the hub WAN link to reserve one interface for higher Priority traffic.

 Use one interface on the hub WAN link, since both hub and spoke sites will require a second VRF for route-leaking purposes.

 Use one interface on the hub WAN link to ensure simplicity, since only a single route target is required across the entire Layer 3 VPN.

NO.35 You belong to an organization consisting of multiple sites. Your topology is constantly changing. You need a method of encrypting traffic between sites.
Which technology enables you to add new sites without reconfiguring existing sites?

 IPsec Auto VPN with ADVPN

 mesh IPsec overlay VPN

 point-to-point IPsec VPN

 hub-and-spoke IPsec VPN

NO.36 You are deploying new WAN services between two routers and you are required to encrypt all traffic at Layer 2 Which solution would satisfy this requirement?

 802.1X

 MACsec

 IPsec

 RADIUS

NO.37 Which statement is correct regarding classifiers in CoS?

 Classifiers are used to route traffic between routing instances.

 Classifiers are used to define the transmit rate for forwarding classes.

 Classifiers are used to separate traffic into different forwarding classes.

 Classifiers are used to change DiffServ values on outgoing packets.

NO.38 Your customer requires virtual machine mobility between two data centers, and they are pursuing a managed service.
Which solution would satisfy the customer’s requirement?

 an EVPN service provided over IP

 an L3VPN service

 a routed service

 an IPsec VPN service between CE routers

NO.39 Which two statements are correct about Junos Space Connectivity Services Director? (Choose two)

 It is used to design, provision, and monitor Label Discovery Protocol (LDP) and Border Gateway Protocol (BGP) services on devices

 It is used to design and simulate MPLS-TE and LSP routing.

 It is used to design, provision, and deploy MPLS-dynamic, RSVP-signaled LSP, and static LSP services on devices.

 It is used to provide zero touch provisioning (ZTP), which simplifies the deployment of networks by providing policy-driven plug-and-play provisioning and network bring-up operations.

NO.40 A customer reports that their RSVP LSP deployment faces scaling challenges as their network grows. You are asked to propose ways that the network can be optimized.
What are two ways that Paragon Pathfinder (formerly known as NorthStar) helps achieve this optimization? (Choose two.)

 faster detection of LSP failure

 reduction in LSPs due to optimal path selection

 offloading control plane state to a central controller

 creation of LSPs across different IGP areas

NO.41 Your customer is deploying a multi-tenant data center and needs help with the WAN edge design.
What are two main design considerations for this environment? (Choose two)

 support for Virtual Chassis Control Protocol

 support for unified threat management

 support for Network Address Translation

 support for data collection and analysis

NO.42 Which two statements describe why service providers have migrated to IP/MPLS networks? (Choose two.)

 MPLS labels enable several logically separated networks to share a common network infrastructure.

 A single router can be an ingress, egress or transit router for multiple LSPs simultaneously.

 The MPLS ingress router encapsulates IP packets in an MPLS frame and forwards it to the next router in the path.

 MPLS virtualization allows a service provider to use statistical multiplexing to maximize resource utilization.

NO.43 MPLS services are being delivered from provider edge (PE) routers Each PE is connected to multiple customer edge (CE) routers.
What should you use on the PE to isolate customer routes?

 VPN routing and forwarding tables

 access control lists

 external BGP

 port access control lists

 Loading …

Multiple options to prepare for Juniper JN0-1362 Certification Exam:

There are multiple options available to prepare for the Juniper JN0-1362 Certification exam starting from online trials to books, simulators, audio training, and video training. All these resources are designed in the exact format as per the requirements of this certification exam. The queries & queries of these materials are given by professional instructors who make sure that the candidate has fully understood the concept explained. The candidates can also access their online study material for this purpose. Specialist trainers who are certified for this exam offer various courses that include all the specific information about the Juniper JN0-1362 Certification exam and also provide thousands of practice questions.

Pass Your Juniper Exam with JN0-1362 Exam Dumps: https://www.prepawaypdf.com/Juniper/JN0-1362-practice-exam-dumps.html