100% Pass Your CTFL-AuT Exam Dumps at First Attempt with PrepAwayPDF [Q13-Q36]

Rate this post

100% Pass Your CTFL-AuT Exam Dumps at First Attempt with PrepAwayPDF

Penetration testers simulate CTFL-AuT exam PDF

QUESTION 13
Imagine you are participating in an Automotive SPICEassessment In your rote as a software tester, and you receive the Information that your process has been assessed with ”P” on process attribute PA1.1 at capability level 1. Which meaning it correct?

You have NOT fulfilled capacity level 1.

You have fulfilled capacity level 3.

You have fulfilled capacity level 2.

You have fulfilled capability level 1.

QUESTION 14
According to Automotive SPICE3.x, which statement regarding the requirements for a test strategy Is correct?

Thetestlogs should be automated on all lest levels as much as possible to increase the comparability of the test results and reduce the effort for the lest execution.

In the regression testing strategy, methods must be defined for an impact analysis and the selection of appropriate test cases for regression testing

Thetest report must describe the test process including the identification of menaces and dependencies from other processes.

Thetest log must Include methods for test case creation. for the selection of test cases, for the creation of test data and for the lest execution

QUESTION 15
Which statement regarding the objective of ASPICE and ISO 26262 Is true?

To determine the capacity of the product development process, ISO 26262 defines assessable requirements for these processes independently from the critically. For the development of E’E systems.
ASPICE defines requirements for the processes and methods to be used by the tester depending on the ASIL.

For the development of EE systems. ISO 26262 defines requirements for the processes and methods to be used by the tester depending on the ASH. To determine the capability of the product development process. ASPICE defines assessable requirements for these processes, independently from the critically

For the development of E/E systems, ISO 26262 defines requirements for the processes and methods to be used by the tester independently from the ASIL. To determine the capability of the product development process. ASPICE defines assessable requirements for those processes depending on the critically.

To determine the capability of the product development process, ISO 26262 defines requirements for the processes and methods to be used by the tester depending on the ASIL. For the development of E/E systems. ASPICE defines assessable requirements for the processes, Independently from the criticality.

QUESTION 16
Which statement regarding the contribution of the tester to a safety culture is true?

The tester performs the hazard analysis and the risk assessment for the product at the beginning of the project.

The tester always takes the overall context of the product development Into account when she/he executes their tasks

In systems that could potentially lead to physical injury or damage to the health of people the tester analyses potential hazards.

The tester creates the hardware-software interface and provides this document to the safety manager

QUESTION 17
Which statement regarding requirements-based testing is true?

Requirements-based testing can be combined with other lest practices or testing techniques.

Requirements-based testing can solve issues like complete requirements

Only extensive and delated requirements can be covered completely by the tester.

Requirements-based testing is a testing technique

QUESTION 18
Which of the following measures is MOST suitable for dealing with the increasing complexity of product development?

Recruitmentof additional employees

Use of experienced employees as coaches for new inexperienced employees

Creation of new subsidiaries(e g. Romania, India)

Use of several models as variants of a common platform

QUESTION 19
Your company produces electric windows and corresponding control units. The newest control unit for electric windows has repeatedly been problematic, which youthink result from issues In therequirements, in particular, you noticed Bee following requirements in your first review.
Which of the following requirements for the system test violates at least one of the quality criteria of the ISO/IEC/IEEE 29148:2011 ?
ID; 12. When the central lock is activated, then all windows are automatically closed.
ID; 37 Given: the ignition q activated. When the button tor a window is pressed down, then the window moves down.
ID; 85: Given: the window moves up. When the window encounters resistance, then the window ttng motor stops.
ID; 142; Given: a door is open When the button for a window is pressed then the message M-85 is sent to the control unit

The requirement 85 is not atomic

The requirement 37 is Inconsistent on system level.

The requirement 12 is ambiguous.

The requirement 142 is not verifiable on system level

QUESTION 20
Which statement regarding the design of a MIL test environment Is TRUE?

To execute the tests, the tester needs a computer and the correspond^) simulation software, including the environmental model.

Interface and integration tests are two test types or test levels that can only be applied in a Mil test environment.

In the MIL test environments, the simulation time runs in real time because the software is running on real hardware.

The test environment includes a real time capable computer, which can capture ail relevant signals r time

QUESTION 21
Which dimension Is defined in Automotive SPICE?

Resource dimension

Capability dimension

Objective dimension

Time dimension

QUESTION 22
Which statement characterizes back-to-back testing?

Back-to-back testing is a variation of pair programming in which the testers should sit back to back to be able to work as independently as possible from each other.

Back-to-back testing compares test objects with mainly overlapping requirements to recognize the results of requirement change.

Back-to-back testing compares lest objects which are based on the same requirements.

Back-to-back testing compares different execution environments of the same test object

QUESTION 23
Which statement regarding the test levels In a test environment is true?

For integration tests SiL Mil and HiL test environments are suitable

For load and stress tests. MIL and HiL test environments are suitable

The correct classification of the test levels has no died influence on the safety relevance of the test object (with regard to ISO 26262).

For component tests, St and MiL test environments are suitable

QUESTION 24
Which of the following options describes a relevant aspect of the design of a test environment for software-ln-the-loop (SIL)?

A wrapper is used as part of the testing with Software-in-the-Loop (SiL)

Software-m-the-Loop (SL) needs an Interface to the real vehicle or prototype.

With Software4rMhe-loop (SI), the tested software is implemented m a real control unit,

For Software-in-the-Loop (SIL). usually no specific hardware is used

QUESTION 25
Which example describes a typical application of a closed-loop system?

Activating the hazard warning lights is to be tested To do so. the flashing lights are monitored and the flashing frequency is measured and assessed.

The setting of an error memory entry in the motor control unit Is to be tested To do so, the motor temperature is Increased above the critical limit and afterwards, the subsequent error memory entry will be read and assessed.

The correct reaction of the windscreen wiper is to be tested To do so. the ram sensor Is activated by water on the screen and the windscreen wiping activities are monitored.

A cruise control is to be tested by reaching me target speed In a given time and holding this speed despite outside disturbances. Different driving scenarios are simulated for this.

QUESTION 26
Which statement regarding the coding standard MlSRA-C:2012 Is true?

MISRA-C defines rules and guidelines. Rules are verifiable by static analysis tools and are always required.

MISRA-C defines rules and guidelines that are supposed to help avoid anomalies In object-oriented developed software (e.g. in C++)

MISRA-C defines rules that include among others that the source code should not include nested comments.

A typical rule in MISRA-C is that the developer has documented the implemented behavior wen.

QUESTION 27
In which volume of ISO 26262 does the tester find requirements and recommendations for test- and verification-specific aspects of the SOFTWARE level?

Volume 7 (ISO 26262-7)

Volume 6 (ISO 26262-6)

Volume 6 (ISO 262624)

Volume 4 (ISO 26262-4)

QUESTION 28
Which of the following statements regarding the application of standards is true?

The application of standards helps to create transparent communication between the project stakeholders.

The application of standards which standardize products has the sole purpose to reduce project risks

The application of standards primarily alms at reducing costs.

The application of standards reduces the efficiency of agile projects

ISQI CTFL-AuT Exam Syllabus Topics:

Topic	Details
Topic 1	Assessment levels and capability indicators Project aspects influenced by standards (K1)
Topic 2	Differences between Closed-Loop and Open-Loop (K2) Contribution of the tester to the safety culture
Topic 3	Essential interfaces, databases and communication protocols of a electronic control unit (K1) Requirements of the standard (K3)
Topic 4	Advantages and disadvantages oftesting in the XiL test environments Integration of the tester in the safety lifecyle (K2)
Topic 5	Classification of the XiL test environments (MiL, SiL, HiL) in the general V-model The influence of criticality on the extent of the test (K2)
Topic 6	Application areas and boundary conditions of a SiL test environment Automotive-specific static and dynamic test techniques
Topic 7	Quality characteristics for reviews of requirements (K3) Functional safety and safety culture (K2)
Topic 8	Context-dependent selection of test techniques (K3) Objective of functional safety for E E systems
Topic 9	Influence of ASIL on test techniques, test types and the extent of the test Process categories in the process dimension

All CTFL-AuT Dumps and Training Courses: https://www.prepawaypdf.com/ISQI/CTFL-AuT-practice-exam-dumps.html

100% Pass Your CTFL-AuT Exam Dumps at First Attempt with PrepAwayPDF [Q13-Q36]

ISQI CTFL-AuT Exam Syllabus Topics:

admin

Leave a Reply Cancel reply

ISQI CTFL-AuT Exam Syllabus Topics:

admin

You might also like

Leave a Reply Cancel reply