[Nov-2023] Get 100% Real NCM-MCI-5.20 Free Online Practice Test [Q88-Q108]

Rate this post

[Nov-2023] Get 100% Real NCM-MCI-5.20 Free Online Practice Test

BEST Verified Nutanix NCM-MCI-5.20 Exam Questions (2023)

Nutanix NCM-MCI-5.20 certification exam is designed for IT professionals who are interested in expanding their knowledge and skills in multicloud infrastructure management. Nutanix Certified Master – Multicloud Infrastructure (NCM-MCI) 5.20 certification exam validates the expertise of IT professionals in managing and deploying cloud-based solutions across multiple clouds, including public, private, and hybrid clouds. Nutanix Certified Master – Multicloud Infrastructure (NCM-MCI) 5.20 certification exam covers a wide range of topics, such as cloud deployment models, infrastructure management, automation, and security.

Nutanix NCM-MCI-5.20 exam is designed for professionals who want to validate their skills and knowledge in managing and deploying Nutanix infrastructure across multiple cloud environments. Nutanix Certified Master – Multicloud Infrastructure (NCM-MCI) 5.20 certification is specifically designed for individuals who have a deep understanding of cloud computing technologies and the ability to manage hybrid and multicloud environments.

Q88. A customer has a Nutanix cluster with 10Gb connectivity via switch fabric extenders. The administrator receives NCC health check errors of latency greater than 200ms.
Which action should the administrator take to resolve the NCC errors?

Replace the switch fabric extenders with 10G line rate switches

Upgrade NCC and increase the CVM memory by 4Gb

Add 2 additional 10G uplinks from the switch fabric extenders per node

Upgrade NCC and increase the vCPU of the CVM

Q89. An administrator needs to determine current CPU usage across multiple clusters.
Which method should the administrator use to generate this type of report?

Prism Central, Home, Manage Dashboards

Prism Central, Explore, Hosts

Prism Central, Home, Add Widgets

Prism Central, Explore, Clusters

Q90. Refer to the Exhibit.

An Administrator Notices that the Data Resiliency status of some components has been reduced to 0, making it impossible to support a node failure in the cluster.
What failed Component Caused this Issue?

Block

Node

Disk

CVM

Q91. An administrator needs to create and start five new VMs for a Data Analytics Project (OLAP). The VM Profile is as follows:
* vCPU:4
* vRAM: 64 GB
* vDisk: 1.5 TB
Each of the four nodes of the Nutanix cluster has the following:
* 24 vCPU. 20% overall usage
* 192 GB RAM, 60% overall usage
* 2xl920GBSSD
* 4x 2 TB HDD
At cluster level, there is a single RF2 container that is 30% utilized and has an extent store capacity of 13.5 TB.
Which component requires administrator attention?

Physical RAM, because it is not enough to power on all of the new VMs.

Physical Cores, because they are not enough to power on all of the new VMs.

Storage, because the capacity is not enough to create VMs.

Flash Tier because it is not enough to accommodate the workloads.

Q92. An administrator is managing two AHV and vSphere-Based Clusters. The administrator is able to install a Windows Guest OS from an ISO Image to VMWare VMs , but is unable to do the same activity with AHV VMs.
What should the administrator do to successfully perform this action with AHV VMs?

Change VM Setting From BIOS to UEFI

Provide virtIO Drivers

Verify cluster iSCSI data Services IP

Manag Nutanix Guest tools

Q93. An administrator is notified that a bare metal database server is down. This database server is being served storage using a Nutanix Volume Group. Upon investigating, the administrator finds that the disks in the database server that map to the vDisks in the volume group have gone offline.
What is causing this issue?

The Volume Group Load Balancer has been disabled.

Port 9443 is blocked in the server firewall.

Port 3260 has been blocked in the server firewall.

A CVM serving the Volume Group has gone offline.

Q94. A VM is exhibiting one or more of the following baseline values based on the past 30 days:
* CPU usage < 20%
* CPU ready time < 5%
* Memory usage < 50% (moderately) or < 20% (severely)
* Memory swap rate = 0 Kbps
Which type of VM is being described?

Constrained VM

Inactive VM

Bully VM

Over-Provisioned VM

Q95. An administrator is deploying an application that requires maximum I/O throughput for scratch dat a. The administrator is concerned that the throughput requirement is greater than what can be provided by a single cluster node.
What should the administrator do to meet this requirement?

Create a volume group with several virtual disks and attach to the VM

Create a volume group with one virtual disk attached to the VM

Create a virtual disk attached to the VM’s PCI interface

Create several virtual disks attached to the VM’s virtual SCSI controller

Q96. What is the minimum number of blocks required to utilize block awareness?

Q97. An administrator is deploying a three-tier application on a Nutanix Enterprise Cloud consisting of web, application, and database VMs. Traffic between the servers must be limited to specific services/ports. There is an application layer firewall VM deployed on one host in the cluster.
In which way should the administrator meet this requirement?

Create a network for each type of VM, and use policy-based routing to control the traffic flow

Configure a security policy and service chain redirecting the server traffic through the firewall

Separate the web. application and database VMs on to dedicated VLANs

Categorize the VMs in Prism Central and utilize Flow to set a security policy

Q98. An administrator has an existing Nutanix seven-node cluster running at RF2 that must be changed to have the following capabilities:
* RF3 set for the cluster
* Performance tier deduplication
What is the minimum memory needed on the CVMs to allow for these capabilities?

24GB

28GB

32GB

20G?

Q99. Refer to the exhibit.

A Nutanix host is connected as shown in the exhibit with br0-up set to active/backup. Physical Switch 1 experiences a power outage causing br0-up to failover to using eth2. The CVM and host become inaccessible. User VMs restart on other hosts in the cluster, which causes a disruption to those VMs.
Which configuration issue likely caused this outage?

Bridge br0-up should be configured to use balance-tcp rather than active/backup.

The CVM should have eth1 connected to the OVS.

The upstream port for eth2 is missing a VLAN.

The user VMs only have one NIC

Q100. An administrator needs to migrate workloads from a Nutanix cluster running VMware ESXi to Nutanix AHV. The migration process needs to be completed in multiple VM groups and support roll back in case any problems are found during user acceptance testing.
Which action should the administrator perform?

Use Cross Hypervisor DR to replicate VMs from ESXi to AHV

Use VMware Converter

Use Nutanix one-click cluster conversion from ESXi to AHV

Use storage live migration

Q101. An organization is planning an upgrade to AOS 5.15 and wants to understand which cluster products and/or services are supported for physical traffic isolation.
Which Nutanix component supports its network traffic being isolated onto its own virtual network?

Volumes

Objects

Containers

Files

Q102. An administrator receives a notification that storage in a Nutanix cluster is unavailable. The cluster consists of five nodes and is configured with a Fault-Tolerance level of 1 (FT-1).
Upon investigation, the administrator finds the following:
* All AHV hosts are powered on and the CVMs are running
* Nodes A, B, and C are connected to one top of rack switch
* Nodes D and E are connected to a second top of rack switch
* The cluster status command run on Node A shows that CVM services on nodes D and E are down Which issue is causing the storage outage?

The default gateway for the CVMs and AHV hosts is down.

The switch connecting Nodes D and E is down.

The genesis process is down on both Nodes D and E.

Nodes D and E are in maintenance mode.

Q103. An administrator needs to evaluate if the existing configuration of Protection Domains meets the specified corporate recovery policy for SQL Dat a. The corporate policy requires that all SQL Servers be recoverable at the DR site within 30 minutes, and must result in a maximum of 60 minutes of data loss. SQL data must be required.
The protection domain is configured as follows:
* Application consistent snapshots are enabled
* The SQL server VMs are assigned to the Protection Domain as their own Consistency Group
* The Protection Domain schedule is configured as snapshots taken every 90 minutes from 7 am until 8 pm What must be changed to meet the required policy?

Revise the schedule tc be 15 minutes

Revise the schedule to be 60 minutes

Revise the schedule to be 30 minutes

Revise the schedule to be 45 minutes

Q104. A Nutanix cluster is equipped with four nodes. Four VMs on this cluster have been configured with a VM-VM anti-affinity policy and are each being hosted by a different node.
What occurs to the cluster and these VMs during an AHV upgrade?

One VM out of the four powers down when the node hosting it reboots.

One node hosts two VMs while the node being upgraded is in maintenance mode.

The AHV pre-upgrade checks fail until the four VMs are powered off.

The AHV pre-upgrade checks fail until the administrator disables the anti-affinity policy.

Q105. An administrator has a VM that consumes large amounts of storage and has the following characteristics:
* Create large / sequential writes
* Data must be kept for years
* Data is normally only accessed at the end of the year to run report
The administrator decides to use Erasure Coding to save space.
Which feature should the administrator utilize to save space for this VM?

Inline Compression

Flash Mode

Cache Dedup

Post-Process Compression

Q106. In an AHV cluster, an administrator needs to enable an application to share a disk b group but needs to enable the VMs to see the volume group.
How should the administrator accomplish this task?

Configure a virtual disk on each VM with identical attributes in the storage dashboard.

Add the volume group to the VM using the update link from the VM dashboard.

Add a disk to one VM and enable read/write on it from the other VM.

Create a shared folder for the VMs using Nutanix Files.

Q107. A systems administrator configures a protection domain replication between two Nutanix clusters. After the first successful replication, the administrator tests DR by clicking activate on the remote cluster.
While VMs are active on the remote cluster, the protection domain is marked as active on both clusters.
What steps are required to return both clusters to their original state?

1. On the remote site, deactivate the Protection Domain using ncli
2. On the primary site, select the Protection Domain and dick migrate

1. On the remote site, promote the Protection Domain
2. On the primary site, change the Protection Domain state from Decoupled to Disabled
3 Enable the original primary site as remote site

1. On the prima7 site, suspend replications
2. On the remote site, deactivate the Protection Domain using ncli
3. On the remote site, migrate the protection domain back to the primary site

1 On the remote site, restore the snapshots from the Protection Domain
2. On the remote site, select the Protection Domain and migrate to the primary site

Q108. For several days, an administrator notices the following alerts:
* CVM NIC Speed Low Warning Alerts
* Warning Alerts of CVM NIC not performing at optimal speed
* CVM is disconnected from the network Critical Alert
* Network Visualization page shows excessive dropped packets on CVM/Host Which steps should be taken to determine which problem should be addressed first?

* Access the Hardware Page to verify resources are available
* Analyze ail CVM Speed Alerts in the Alerts/Events page
* Analyze output for the network and interface properties and connectivity issues

* Verify Host/CVM connectivity on the Network Visualization page
* Use to verify the bridge and bond configuration
* Review alerts/events page for the CVM disconnected error

* Review Alerts page for NIC speed alerts and alert timing
* Analyze the genesis.out log file for process failures
* Assess the NIC properties in the Network Visualization > Host Properties page

* Restart networking services on the CVM
* Determine the current configuration of the affected CVM via output
* Access the Alerts/Events page for the CVM network connection failures