[Q186-Q205] Best Quality CheckPoint 156-315.81 Exam Questions PrepAwayPDF Realistic Practice Exams [2023]

Rate this post

Best Quality CheckPoint 156-315.81 Exam Questions PrepAwayPDF Realistic Practice Exams [2023]

Critical Information To Check Point Certified Security Expert R81 Pass the First Time

The CheckPoint 156-315.81 exam is based on the R81 version of Check Point’s Security Management and Gateway software. This version includes important updates and enhancements to the software, which are essential for any security expert to know. 156-315.81 exam covers topics such as network security, VPNs, intrusion prevention, and threat prevention. It also covers advanced topics such as automation, orchestration, and cloud security.

NO.186 An administrator is creating an IPsec site-to-site VPN between his corporate office and branch office. Both offices are protected by Check Point Security Gateway managed by the same Security Management Server.
While configuring the VPN community to specify the pre-shared secret the administrator found that the check box to enable pre-shared secret and cannot be enabled.
Why does it not allow him to specify the pre-shared secret?

IPsec VPN blade should be enabled on both Security Gateway.

Pre-shared can only be used while creating a VPN between a third party vendor and Check Point Security Gateway.

Certificate based Authentication is the only authentication method available between two Security Gateway managed by the same SMS.

The Security Gateways are pre-R75.40.

NO.187 In Logging and Monitoring, the tracking options are Log, Detailed Log and Extended Log. Which of the following options can you add to each Log, Detailed Log and Extended Log?

Accounting

Suppression

Accounting/Suppression

Accounting/Extended

NO.188 What is the Implicit Clean-up Rule?

A setting is defined in the Global Properties for all policies.

A setting that is configured per Policy Layer.

Another name for the Clean-up Rule.

Automatically created when the Clean-up Rule is defined.

NO.189 What is the command to check the status of the SmartEvent Correlation Unit?

fw ctl get int cpsead_stat

cpstat cpsead

fw ctl stat cpsemd

cp_conf get_stat cpsemd

NO.190 What destination versions are supported for a Multi-Version Cluster Upgrade?

R81.40 and later

R76 and later

R70 and Later

R81.10 and Later

Explanation
The destination versions that are supported for a Multi-Version Cluster Upgrade are R81.10 and later. This means that the cluster members can be upgraded from any supported version to R81.10 or higher using the Multi-Version Cluster mode. R81.40, R76, and R70 are not supported destination versions for a Multi-Version Cluster Upgrade. References: : Check Point Software, Getting Started, Supported Upgrade Paths

NO.191 Fill in the blank. Once a certificate is revoked from the Security Gateway by the Security Management Server, the certificate information is ________ .

Sent to the Internal Certificate Authority.

Sent to the Security Administrator.

Stored on the Security Management Server.

Stored on the Certificate Revocation List.

NO.192 Which application should you use to install a contract file?

SmartView Monitor

WebUI

SmartUpdate

SmartProvisioning

NO.193 Tom has connected to the R81 Management Server remotely using SmartConsole and is in the process of making some Rule Base changes, when he suddenly loses connectivity. Connectivity is restored shortly afterward.
What will happen to the changes already made?

Tom’s changes will have been stored on the Management when he reconnects and he will not lose any of his work.

Tom will have to reboot his SmartConsole computer, and access the Management cache store on that computer, which is only accessible after a reboot.

Tom’s changes will be lost since he lost connectivity and he will have to start again.

Tom will have to reboot his SmartConsole computer, clear to cache, and restore changes.

Explanation
Tom’s changes will have been stored on the Management when he reconnects and he will not lose any of his work.
This is because SmartConsole has a feature called Concurrent Administration, which allows multiple administrators to work on the same Security Policy simultaneously, without blocking each other or creating conflicts. Concurrent Administration uses a locking mechanism to prevent multiple administrators from modifying the same rule or object at the same time. When an administrator clicks on a rule or an object, it becomes locked and a lock icon appears next to it. The lock icon shows the name of the administrator who is working on that rule or object, and prevents other administrators from editing it until it is unlocked12.
Concurrent Administration also has a feature called Session Persistence, which preserves the changes made by an administrator in case of a network failure or a SmartConsole crash. When an administrator reconnects to the Management Server after a network failure or a SmartConsole crash, they can resume their work from where they left off, without losing any changes. The changes are stored locally on the administrator’s machine until they are published to the Management Server13.
Therefore, if Tom has connected to the R81 Management Server remotely using SmartConsole and is in the process of making some Rule Base changes, when he suddenly loses connectivity, his changes will not be lost.
They will be stored locally on his machine and he can resume his work when he reconnects to the Management Server.

NO.194 Which configuration file contains the structure of the Security Server showing the port numbers, corresponding protocol name, and status?

$FWDIR/database/fwauthd.conf

$FWDIR/conf/fwauth.conf

$FWDIR/conf/fwauthd.conf

$FWDIR/state/fwauthd.conf

Explanation
The configuration file that contains the structure of the Security Server showing the port numbers, corresponding protocol name, and status is $FWDIR/conf/fwauthd.conf. This file is used for configuring authentication services in Check Point Security Servers.
References: Check Point documentation or training materials related to Security Server configuration.

NO.195 What is the command to check the status of Check Point processes?

top

cptop

cphaprob list

cpwd_admin list

Explanation
The command to check the status of Check Point processes is cpwd_admin list. This command displays the process ID, name, state, start time, and watchdog status of all the processes that are monitored by the Check Point WatchDog daemon (CPWD). You can also use this command to start, stop, or restart a specific process.
References: [cpwd_admin Command]

NO.196 Alice & Bob are going to use Management Data Plane Separation and therefore the routing separation needs to be enabled. Which of the following command is true for enabling the Management Data Plane Separation (MDPS):

set mdps split brain on

set mdps split plane on

set mdps mgmt plane on

set mdps data plane off

NO.197 What is the SandBlast Agent designed to do?

Performs OS-level sandboxing for SandBlast Cloud architecture

Ensure the Check Point SandBlast services is running on the end user’s system

If malware enters an end user’s system, the SandBlast Agent prevents the malware from spreading with the network

Clean up email sent with malicious attachments

Explanation
The SandBlast Agent is designed to prevent malware from spreading within the network if it enters an end user’s system. SandBlast Agent is a lightweight endpoint security solution that protects devices from advanced threats such as ransomware, phishing, zero-day attacks, and data exfiltration. SandBlast Agent uses various technologies such as behavioral analysis, anti-exploitation, anti-ransomware, threat emulation, threat extraction, and forensics to detect and block malware before it can harm the device or the network. The other options are either not the main purpose or not the functionality of SandBlast Agent.

NO.198 What are types of Check Point APIs available currently as part of R81.10 code?

Security Gateway API Management API, Threat Prevention API and Identity Awareness Web Services API

Management API, Threat Prevention API, Identity Awareness Web Services API and OPSEC SDK API

OSE API, OPSEC SDK API, Threat Extraction API and Policy Editor API

CPMI API, Management API, Threat Prevention API and Identity Awareness Web Services API

NO.199 Which Queue in the Priority Queue has the maximum priority?

High Priority

Control

Routing

Heavy Data Queue

https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk105762

NO.200 Using Web Services to access the API, which Header Name-Value had to be in the HTTP Post request after the login?

X-chkp-sid Session Unique Identifier

API-Key

user-uid

uuid Universally Unique Identifier

Explanation
https://sc1.checkpoint.com/documents/latest/APIs/?#web/introduction~v1.9%20 HTTP Headers content-Type:
application/json x-chkp-sid: <session ID token as returned by the login command> The x-chkp-sid header is mandatory in all API calls except the login API.

NO.201 When simulating a problem on ClusterXL cluster with cphaprob -d STOP -s problem -t 0 register, to initiate a failover on an active cluster member, what command allows you remove the problematic state?

cphaprob -d STOP unregister

cphaprob STOP unregister

cphaprob unregister STOP

cphaprob -d unregister STOP

Explanation
When simulating a problem on a ClusterXL cluster with the command “cphaprob -d STOP -s problem -t 0 register” to initiate a failover on an active cluster member, you can use the command “cphaprob -d STOP unregister” to remove the problematic state and return the cluster to normal operation.
Option A correctly identifies the command that allows you to remove the problematic state, making it the verified answer.
References: Check Point Certified Security Expert (CCSE) R81 documentation and learning resources.

NO.202 When using the Mail Transfer Agent, where are the debug logs stored?

$FWDIR/bin/emaild.mta. elg

$FWDIR/log/mtad elg

/var/log/mail.mta elg

$CPDIR/log/emaild elg

NO.203 Which one of these features is NOT associated with the Check Point URL Filtering and Application Control Blade?

Detects and blocks malware by correlating multiple detection engines before users are affected.

Configure rules to limit the available network bandwidth for specified users or groups.

Use UserCheck to help users understand that certain websites are against the company’s security policy.

Make rules to allow or block applications and Internet sites for individual applications, categories, and risk levels.

NO.204 What is the valid range for Virtual Router Identifier (VRID) value in a Virtual Routing Redundancy Protocol (VRRP) configuration?

1-254

1-255

0-254

0 – 255

NO.205 Which Check Point software blade provides Application Security and identity control?

Identity Awareness

Data Loss Prevention

URL Filtering

Application Control

Loading …

CheckPoint 156-315.81 exam is a certification exam designed for professionals who aim to become Check Point Certified Security Experts. Check Point Certified Security Expert R81 certification exam is based on R81, the latest version of Check Point’s security solutions. 156-315.81 exam is intended for security professionals who have experience in managing and maintaining Check Point security solutions and want to validate their skills and knowledge in this area.

156-315.81 EXAM DUMPS WITH GUARANTEED SUCCESS: https://www.prepawaypdf.com/CheckPoint/156-315.81-practice-exam-dumps.html

Get Feb-2023 Dumps to Pass your 156-315.81 Exam with 100% Real Questions and Answers [Q10-Q31]
CheckPoint 156-215.80 Dumps – 100% Cover Real Exam Questions (Updated 527 Questions) [Q293-Q316]
[Q86-Q107] Certification Training for 156-315.80 Exam Dumps Test Engine [2022]

Related posts:

admin

You might also like

Leave a Reply Cancel reply