[Jan-2024] API API-936 Dumps – Secret To Pass in First Attempt [Q29-Q44]

Q29. Metallic anchor made from rod or bar and usually used for dual layer linings that are configured in

Q30. Testing frequency for material qualification of refractory for other services requires

Q31. In API RP 936, the referenced ASTM standard procedure for cold crushing strength and modulus of rupture is

Q32. Materials having refractory properties which form a refractory body when bonded into a conglomerate mass by a matrix is called

Q33. Refractories that are resistant to chemical attack by both acid and basic slags, refractories, or fluxes at high temperature is

Q34. As per ASTM C- 704, for the erosion tests, silicon carbide grit is to be used by

Q35. API 936, the standard test method for abrasion resistance of refractory materials at room temperature is

Q36. To compose a sample for the CCS test from an equivalent number of refractory shapes the specimen should be

Q37. Arrange for testing at either an independent laboratory or the manufacturer’s plant is

Q38. Enclosure inside the top head of a reactor or regenerator vessel which supports the cyclones and in which gases exiting the cyclone outlets are collected is called

Q39. Refractories whose major constituent is lime, magnesia, or both and which may react chemically with acid refractories, acid slags, or acid fluxes at a high temperature is known as

Q40. A typical example of hexalt anchor is

Q41. The air pressure to blast the 1000 g of size graded silicon carbide grain for abrasion resistance test should be

Q42. A group of rock minerals having nearly perfect cleavage in one direction and consisting of thin elastic plates and the most common varieties are muscovite and biotite is called

Q43. Cristobalite is an important constituent of

Q44. Pre-turn around planning means