Download Free Cisco 500-052 Real Exam Questions Download [Q52-Q67]

Section: (none)

Explanation
When Cisco Unified CCX is deployed with Cisco Unified Communications Manager Express (CME), the user management is done through the Application Administration web interface of Cisco Unified CCX. The user data, such as user ID, password, PIN, and roles, are stored in the Cisco Unified CCX database. The user synchronization between Cisco Unified CME and Cisco Unified CCX is done manually by using the Data Synchronization option in the Tools menu of the Application Administration web interface. The user data is not stored in the Cisco Unified CME database, nor is it managed by Cisco Unified CME. References:
Deploying Cisco Unified Contact Center Express (UCCXD) v6.0
Cisco Unified Contact Center Express Installation and Upgrade Guide, Release 11.6(1) – Chapter
2: Preinstallation Tasks for Cisco Unified CCX

Explanation
The invalid deployment option for Cisco Unified Contact Center Express is two Cisco Unified Contact Center Express clusters, each with two nodes, connected to the same Cisco Unified Cisco Unified Communications Manager cluster. This option is not supported because Cisco Unified Contact Center Express does not allow multiple clusters to share the same Cisco Unified Communications Manager cluster. Each Cisco Unified Contact Center Express cluster must have its own dedicated Cisco Unified Communications Manager cluster1.
The other options are valid deployment options for Cisco Unified Contact Center Express:
A two-node Cisco Unified Contact Center Express cluster connected to a Cisco Unified Communications Manager cluster. This option is supported and provides high availability and redundancy for both Cisco Unified Contact Center Express and Cisco Unified Communications Manager. A two-node Cisco Unified Contact Center Express cluster consists of a primaryand a secondary node that can synchronize data and take over the call processing in case of a failure2.
A one-node Cisco Unified Contact Center Express cluster connected to two Cisco Unified Communications Manager clusters. This option is supported and provides redundancy for Cisco Unified Communications Manager. A one-node Cisco Unified Contact Center Express cluster consists of a single node that handles all the call processing and administration functions. A one-node Cisco Unified Contact Center Express cluster can connect to two Cisco Unified Communications Manager clusters using the Intercluster Lookup Service (ILS) feature3.
A one-node Cisco Unified Contact Center Express cluster connected to a Cisco Unified Communications Manager Express router. This option is supported and provides a cost-effective and simplified solution for small and medium-sized businesses. A one-node Cisco Unified Contact Center Express cluster can connect to a Cisco Unified Communications Manager Express router using the Skinny Client Control Protocol (SCCP) or the Session Initiation Protocol (SIP)4.
References: 1: Cisco Unified Contact Center Express Solution Reference Network Design, Release 12.5(1) – Unified CCX Deployment Models [Cisco Unified Contact Center Express] – Cisco 2: Cisco Unified Contact Center Express Solution Reference Network Design, Release 12.5(1) – Unified CCX Deployment Models
[Cisco Unified Contact Center Express] – Cisco 3: Cisco Unified Contact Center Express Solution Reference Network Design, Release 12.5(1) – Unified CCX Deployment Models [Cisco Unified Contact Center Express]
– Cisco 4: Cisco Unified Contact Center Express Solution Reference Network Design, Release 12.5(1) – Unified CCX Deployment Models [Cisco Unified Contact Center Express] – Cisco

Section: (none)

Explanation
In Cisco Unified CCX Administration, when you add a Cisco Unified Communications Manager (CUCM) Telephony group, a CTI Route Point is created on the CUCM. A CTI Route Point is a virtual device that can receive multiple simultaneous calls and route them to a Cisco Unified CCX application by using the JTAPI protocol. A CUCM Telephony group defines the CUCM cluster, the JTAPI user, and the CTI Route Point that are associated with a Cisco Unified CCX system12 The other options are not correct:
CTI Ports: CTI Ports are virtual devices that can make or receive calls and are controlled by the JTAPI application. CTI Ports are not created when you add a CUCM Telephony group, but when you add a Cisco Unified CCX Call Control Group12 Cisco Unified CCX Call Control Group: A Cisco Unified CCX Call Control Group is a logical grouping of CTI Ports that are used by the Cisco Unified CCX system to make and receive calls. A Cisco Unified CCX Call Control Group is not created when you add a CUCM Telephony group, but when you configure the Cisco Unified CCX system parameters12 Cisco Unified Communications Manager Call Control Group: A Cisco Unified Communications Manager Call Control Group is a term that does not exist in the Cisco Unified CCX terminology.
References: 1: Cisco Unified Contact Center Express Administration Guide, Release 10.0(1) – Unified CM Configuration [Cisco Unified Contact Center Express] – Cisco 1 2: Cisco Unified Contact Center Express Design Guide, Release 10.0(1) – Unified CM Telephony Subsystem [Cisco Unified Contact Center Express] – Cisco 2

Explanation
The correct answer is B. A variable in the Application Editor that is defined as a parameter means that the value for that variable can be supplied via Application Configuration in Application Administration. This allows the administrator to change the value of the variable without modifying the script. For example, a parameter variable can be used to store the CSQ name, the prompt file name, the holiday schedule, or any other value that might change over time or across applications1.
The other options are not correct because:
A). The variable can be used to pass data to and from subflows. This is not related to the parameter property of the variable. Any variable can be used to pass data to and from subflows, as long as it is in the scope of the subflow. A subflow is a script that is invoked by another script, and it can have its own parameters that are mapped to the variables of the calling script2.
C). The value for that variable is defined by the calling application. This is not related to the parameter property of the variable. Any variable can be defined by the calling application, as long as it is passed as an argument to the called application. An application can be called by another application using the Call Subflow step or the Trigger Application step3.
D). The variable can be used in conditional steps. This is not related to the parameter property of the variable. Any variable can be used in conditional steps, as long as it has a valid data type and value. A conditional step is a step that evaluates an expression and executes one of the branches based on the result.
E). The variable can be used to pass data to and from VoiceXML applications. This is not related to the parameter property of the variable. Any variable can be used to pass data to and from VoiceXML applications, as long as it is mapped to the VoiceXML session variables. A VoiceXML application is an application that uses VoiceXML documents to provide interactive voice response services.
References: 1: Cisco Unified Contact Center Express Editor Step Reference Guide, Release 12.5(1) – Chapter
1: General Steps [Cisco Unified Contact Center Express] – Cisco 2: Cisco Unified Contact Center Express Editor Step Reference Guide, Release 12.5(1) – Chapter 1: General Steps [Cisco Unified Contact Center Express] – Cisco 3: Cisco Unified Contact Center Express Editor Step Reference Guide, Release 12.5(1) – Chapter 1: General Steps [Cisco Unified Contact Center Express] – Cisco : [Cisco Unified Contact Center Express Editor Step Reference Guide, Release 12.5(1) – Chapter 1: General Steps [Cisco Unified Contact Center Express] – Cisco] : [Cisco Unified Contact Center Express Editor Step Reference Guide, Release
12.5(1) – Chapter 6: VoiceXML Steps [Cisco Unified Contact Center Express] – Cisco]

Explanation
The Expression Editor panel of Cisco Unified CCX Script Editor is a tool that allows you to create and edit expressions that can be used in the script steps. The Expression Editor panel has two tabs: Script and Java. The Script tab allows you to create expressions using the Cisco Unified CCX Expression Language, which is a subset of the Java language. The Java tab allows you to create expressions using the full Java language12 There are three reasons to use the Java tab in the Expression Editor panel:
To invoke a specified method of a custom Java class. A custom Java class is a user-defined class that extends the functionality of the Cisco Unified CCX Expression Language. You can create a custom Java class by using the Java Development Kit (JDK) and import it into the Cisco Unified CCX Script Editor.
You can then use the Java tab to invoke the methods of the custom Java class by using the dot notation. For example, if you have a custom Java class named MyMath that has a method named square, you can use the Java tab to invoke the square method on a variable x by using the expression MyMath.square(x)12 To reference a variable of a custom Java Object. A custom Java Object is an instance of a custom Java class that can be created and stored as a variable in the script. You can use the Java tab to reference the variable of a custom Java Object by using the dot notation. For example, if you have a custom Java Object named myObj that has a variable named name, you can use the Java tab to reference the name variable by using the expression myObj.name12 To allow for arguments to be passed to a specified method. An argument is a value that is passed to a method when it is invoked. You can use the Java tab to pass arguments to a specified method by using the parentheses notation. For example, if you have a method named add that takes two arguments x and y and returns their sum, you can use the Java tab to pass the arguments 3 and 5 to the add method by using the expression add(3, 5)12

Explanation
The Database subsystem enables the Unified CCX applications to obtain information from data sources, which are databases configured to communicate with the Unified CCX system. You can connect the Unified CCX system with enterprise databases such as Microsoft SQL Server, Sybase, Oracle, or IBM DB2. The Database subsystem is available if your system has a license installed for either the Unified IP IVR or Unified CCX Premium product packages. If you are not using Unified CCX applications that require access to databases, you do not need to provision the Database subsystem. References: Cisco Unified Contact Center Express Administration Guide, Release 11.5 (1) – Provision of Additional Subsystems

Explanation
Relative filters are used to generate historical reports for a predefined time period, such as today, yesterday, this week, last week, this month, last month, year to date, or last year. They allow users to select the date range and time range options for the report data. Relative filters are not applicable for real-time or live data reports, which use key criteria and field filters instead. Relative filters are also not used for filtering spam emails or reporting on port usage, which are not related to the report generation process. References:
Cisco Unified Contact Center Express Report User Guide, Release 11.6 (1), Chapter: Report Filters, Section: Filter Types, Subsection: Date & Time
[Deploying Cisco Unified Contact Center Express (UCCXD) v6.0]2, Module 3: Cisco Unified CCX Reporting, Lesson 2: Cisco Unified CCX Historical Reports, Topic: Historical Reports Filters