100% Free NCIE SAN E-Series NS0-516 Dumps PDF Demo Cert Guide Cover [Q34-Q54]

Q34. Your company has deployed an E2824 and has decided to change the host protocol from iSCSI to FC You use the storage array profile to review the installed SFPs.
In this scenario, which set of supported data rates indicates that you are using dual-purpose SFPs?

Q35. What SANtricity package(s) must be installed on a Windows server when it is acting as both a data host and a storage management host?

Q36. A customer is experiencing performance issues on their NetApp E-Series system that is running with iSCSI host interface cards (HICs).
In this scenario, in which two locations in the GUI would you go to find detailed statistics for the ISCSI connections on this system? (Choose two.)

Q37. A customer needs to add an EF280 with FC into its existing Brocade fabric but the FC ports in the SANtricity System Manager are showing the FC ports as down and the LED on the FC HIC is amber.
Which three tasks does the installer need to complete to solve this problem? (Choose three.)

Q38. Synchronous mirroring requires what type of connection between storage systems? (Choose the best answer.)

Q39. An orphaned volume occurs during an asynchronous mirror implementation. You must recover the orphaned volume.
In this scenario, which statement is correct?

Q40. What is the total number of ALUA paths from the host to a volume on the EF280 that is shown in the exhibit?

Q41. Exhibit:

Referring to the exhibit, which cable is an InfiniBand 4X connector?

Q42. A customer needs a system for a new solution that they are designing. They have provided you with the performance and capacity requirements.
In the NetApp Fusion UI, which workflow should you perform to help the customer?

Q43. You want to find detailed information about the devices that are connected to the Brocade switch.
In this scenario, which command would accomplish this goal?

Q44. The ability of many E-Series controllers to hold an additional firmware image in reserve _________. (Choose the best answer.)

Q45. A d-stripe within a disk pool is always the equivalent of _______. (Choose the best answer.)

Q46. When a drive fails in a Dynamic Disk Pool (DDP) with no free capacity, what happens to the data?

Q47. What system file is used during the controller start-of-day sequence to determine various SCSI parameters and other host-type specific settings for an E-Series system? (Choose the best answer.)

Q48. You want to find detailed information about the devices that are connected to the Brocade switch.
In this scenario, which command would accomplish this goal?

Q49. Hot spares provide which function? (Choose the best answer.)

Q50. Witch function does the SANtricity Enterprise Management Window (EMW) provide? (Choose the best answer.)

Q51. Which type of caching on E-Series systems should be enabled according to NetApp recommended practices?

Q52. Which iSCSI setting would you change from its default value to increase the throughput of an iSCSI host port on a NetApp E-Series system?

Q53. Which sequence describes the procedures for hot-adding an additional expansion enclosure to an existing E-Series configuration? (Choose the best answer.)

Q54. Exhibit:

A customer’s host is running a Red Hat Enterprise Linux 7.6 server with dm-mp configured for ALUA and is connected to a single volume on the EF280 system that is shown in the exhibit.
In this scenario, how many active/optimized paths are available to the volume?