[Q59-Q81] Pass Your CCT Data Center 010-151 Exam Easily with Accurate PDF Questions [Apr 14, 2023]

Rate this post

Pass Your CCT Data Center 010-151 Exam Easily with Accurate PDF Questions [Apr 14, 2023]

010-151 Certification Exam Dumps Questions in here

The Cisco 010-151 certification exam is part of the Cisco Data Center track and is designed for individuals who want to validate their skills in supporting Cisco data center networking devices. This exam is intended for technical support engineers, field engineers, and system engineers who work with Cisco data center solutions. The Supporting Cisco Datacenter Networking Devices (DCTECH) exam is the first step towards obtaining the Cisco Data Center certification.

NO.59 Refer to the exhibit.

Which call-out accurately shows the current running version of the Cisco UCS Manager management software?

A – UCS Manager running version 1.4(1m)

B – IO Module 1 running version 1.4(1m)

C – Interface Card 1 running version 1.4(1m)

D – Kernel running version 4.2(1)N(1.4m)

NO.60 Which command syntax is correct to reset the admin password when the switch is in the kickstart prompt?
switch(boot) #”

exec -> admin-password

connect local-mgmt -> admin-password

configure terminal -> admin-password

connect nxos -> admin-password <password>

admin-password

NO.61 Refer to the exhibit.

Which three options are features of the Cisco UCS 6248UP Fabric Interconnect front panel? (Choose three.)

Console port

FCoE port

10 Gb/s port

Fan module

USB port

NO.62 Which group of UCS Virtual Interface Cards is exclusively designed for Cisco UCS C-Series Rack Server?

VIC 1455, VIC 1480, VIC 1385, VIC 1340, VIC 1280

VIC 1440, VIC 1340, VIC 1388, VIC 1280, M81KR VIC

M81KR VIC, VIC 1497, VIC 1340, VIC 1387, VIC 1240

VIC 1455, VIC 1497, VIC 1385, VIC 1387, VIC 1225

Explanation
Explanation/Reference: https://www.cisco.com/c/en/us/products/collateral/interfaces-modules/unified-computing-system- adapters/datasheet-c78-741130.html

NO.63 Refer to the exhibit.

Which statement correctly identifies the front panel LEDs on the Cisco UCS C220 Server?

A is power button and power status LED; B is identification button and LED; C is system status LED; D is network link activity LED.

A is network link activity LED; B is system status LED; C is power button and power status LED; D is identification button and LED.

A is system status LED; B is network link activity LED; C is power button and power status LED; D is identification button and LED.

A is network link activity LED; B is system status LED; C is identification button and LED; D is power button and power status LED.

NO.64 Refer to the exhibit.

Which statement correctly identifies the front panel LEDs on the Cisco UCS C220 Server?

A is power button and power status LED; B is identification button and LED; C is system status LED; D is network link activity LED.

A is network link activity LED; B is system status LED; C is power button and power status LED; D is identification button and LED.

A is system status LED; B is network link activity LED; C is power button and power status LED; D is identification button and LED.

A is network link activity LED; B is system status LED; C is identification button and LED; D is power button and power status LED.

NO.65 Which statement is true about SFP?

SFP modules convert the serial electrical signals to serial analog signals and vice versa.

The small form-factor pluggable (SFP) is a compact, hot-pluggable copper module transceiver.

SFP modules offer a simple and effective way to connect a single network device to a wide variety of fiber cable types.

SFP modules can be classified based on the working voltage and size.

Explanation/Reference: http://www.carritech.com/news/sfps-used-telecommunication-systems/

NO.66 Which Cisco NX-OS command displays kernel uptime?

show module

show version

show license

show boot

show interface

NO.67 After installation or replacement of a Cisco UCS C-Series Rack-Mount Server, the host does not boot.
Which four options should be verified? (Choose four.)

Verify the power source to the equipment.

Check for loose HDD cables.

Reseat the DIMMs, CPU, and PCI cards.

Verify that power supplies are receiving power.

Reseat the mezzanine card connector.

Check the CPU sockets for bent pins.

Check the Cisco IMC for fan faults.

NO.68 Which cable is used to access the command-line interface of a Cisco UCS 6120XP Fabric Interconnects?

KVM cable

console cable

Ethernet cable

SFP+ Ethernet transceiver cable

Explanation/Reference:
corrected.

NO.69 When replacing a standalone C-Series server which order will be used to shut down the server via CIMC?

Click Power off, Click Shut off

Click Power off, Click Shut down

Click Host power, Click Shut off

Click Host power, Click Shut down

NO.70 In Cisco UCS C480 M5 server, which PCIe slot is the default slot for the rear RAID controller when the rear drive module is used with SAS/SATA drives?

PCIe slot 09

PCIe slot 10

PCIe slot 11

PCIe slot 12

Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/hw/C480M5/install/C480M5/ C480M5_chapter_01.html

NO.71 Which three statements about powering down a Cisco UCS C-Series Rack-Mount Server to perform maintenance or replacement are true? (Choose three.)

Standby power mode: Power is supplied only to the service processor and the cooling fans, and it is safe to power off the server from this mode.

Power status LED. Green indicates that the server is in main power mode and can be safely powered off.

Graceful shutdown: Press and release the power button. The operating system performs a graceful shutdown, and the server goes to standby mode, which is indicated by an amber power status LED.

Disconnect the power cords from the power supplies in your server to completely power off the server.

Only an emergency shutdown can be performed using the power button on the server front panel.

The Cisco UCS C-Series Rack-Mount Server has only one power mode.

NO.72 Which three troubleshooting procedures do you perform when there is no power to a Cisco UCS B250 M2 Blade Server? (Choose three.)

Decommission and acknowledge the blade.

Check the back of the blade to ensure that there is no damage to the connection that goes into chassis.

Reseat the memory DIMMs.

Check the CPU sockets for bent pins.

Reseat the blade in the same slot in the chassis.

Move the blade to another slot in the chassis.

NO.73 Refer to the exhibit.

Which Cisco MDS chassis supports the 48-Port 16-Gbps Fibre Channel Switching Module?

MDS 9509

MDS 9513

MDS 9710

MDS 9506

NO.74 When activating the firmware via UCSM which two firmware versions must be activated at the same time?

UCS Manager and System

UCS Manager and Kernel

CIMC and Kernel

System and Kernel

Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/ Firmware-Mgmt/3-1/b_UCSM_GUI_Firmware_Management_Guide_3_1/ b_UCSM_GUI_Firmware_Management_Guide_3_1_chapter_011.html

NO.75 Refer to the exhibit.

Where is the best place to see bootflash free space?

A – Available Memory

B – Total Memory

C – Local Storage Information

D – High Availability Details

NO.76 Which fiber optic cable type is used most often with a Subscriber connector?

dual-mode

single-mode

straight-mode

multi-mode

subscriber-mode

NO.77 Drag the password recovery procedures on a Cisco NX-OS switch from the left to the right and place them in order.

NO.78 Drag the cable or connector on the left to the correct interface on the right.
Select and Place:

Explanation/Reference:

NO.79 Which transceiver can support 400 Gigabit Ethernet?

QSFP-DD

QSFP+

QSFP28

SFP-DD

Explanation/Reference: https://www.cisco.com/c/en/us/products/collateral/interfaces-modules/transceiver-modules/ datasheet-c78-743172.html

NO.80 To do a password recovery on a Cisco NX-OS Switch, which option shows the correct syntax to display the bootflash contents at the switch(boot)#?

display bootflash:

show bootflash:

dir bootflash:

find bootflash

NO.81 Which two statements are true about the Cisco UCS C4200 Rack server and UCS C125 M5 compute node?
(Choose two.)

8 NVIDIA SXM2 V100 32G modules with NVLink interconnect

AMD EPYC 7000 series processors, with up to 32 cores per socket

2666-MHz DDR4 memory and 24 DIMM slots for up to 3 TB of total memory

Optional dual USB ports for increased storage or boot drive capacity

Over 45 TB of storage, with up to six small-form-factor 2.5-inch direct-attached drives per node

Loading …

Updated 010-151 Exam Practice Test Questions: https://www.prepawaypdf.com/Cisco/010-151-practice-exam-dumps.html

PrepAwayPDF 300-815 Dumps Real Exam Questions Test Engine Dumps Training [Q19-Q33]
Cisco 300-430 Real Exam Questions and Answers FREE [Q21-Q44]
Cisco New 2022 700-805 Test Tutorial (Updated 50 Questions) [Q16-Q40]
[Jun 16, 2023] Free Cisco 700-765 Exam Questions & Answer [Q40-Q55]

Related posts:

admin

You might also like

Leave a Reply Cancel reply