Real C-IBP-2105 Exam PDF Test Engine Practice Test Questions [Q19-Q40]

Rate this post

Real C-IBP-2105 Exam PDF Test Engine Practice Test Questions

SAP C-IBP-2105 Real 2022 Braindumps Mock Exam Dumps

SAP C-IBP-2105 Certification Exam Topics:

Topic Areas	Topic Details, Courses, Books
Planning Operators & Application Jobs > 12%	Use Planning Operators. IBP300 (SAP IBP OD 2105)
Demand Planning 8% – 12%	Create statistical forecast using historical data with basic methods. IBP200 (SAP IBP OD 2105) IBP600 (SAP IBP OD 2105)
Solution Architecture < 8%	Describe the benefits of implementing SAP’s Integrated Business Planning solution. IBP100 IBP200 (SAP IBP OD 2105) IBP300 (SAP IBP OD 2105)
Key Figures & Attributes > 12%	Create and use key figures and attributes. IBP200 (SAP IBP OD 2105) IBP300 (SAP IBP OD 2105)
S&OP Review < 8%	Describe how IBP extends the logic of S&OP in the network using advanced demand and supply planning integrated with financial plans. IBP200 (SAP IBP OD 2105)
User Interface > 12%	Use the Fiori Launchpad to customize the UI, work with Excel UI IBP200 (SAP IBP OD 2105)
Supply and Response > 12%	Configure supply planning, run various solvers to generate planning results IBP100 IBP110 IBP200 (SAP IBP OD 2105) IBP700 (SAP IBP OD 2105)
Inventory < 8%	Optimize inventory in the supply chain utilizing algorithms that derive inventory targets. IBP100
General Configuration of a Planning Area > 12%	Display, create, copy, edit, check, and activate a planning area. IBP200 (SAP IBP OD 2105)
Analytics and Reporting < 8%	Define and view information with user-defined charts and dashboards. IBP200 (SAP IBP OD 2105) IBP300 (SAP IBP OD 2105)

NEW QUESTION 19
You are reviewing the master data types for supply planning. Which master data types are compound master data types? Note: There are 2 correct Answers to this question.

SOURCELOCATION

LOCATIONFR

SOURCECUSTOMER

SOURCEPRODUCTION

NEW QUESTION 20
Which of the following settings can you use in your supply planning background job triggered from Excel? Note: There are 2 correct Answers to this question.

Target currency

Type of algorithm to use

UOM to ID

Planning unit

NEW QUESTION 21
You are working on a mid-range plan that spans the seasonal peak and you are evaluating the need for additional crewing. Which of the following parameters can you model to plan production with extra shift(s)?

Production source validity at the start of seasonal peak

Capacity expansion with additional costs

Adjusted production interactive values

Incremental production values

NEW QUESTION 22
You run a what-if analysis and use the scenario planning function. Which actions can you perform? Note:
There are 3 correct Answers to this question.

Change scenario-specific master data.

Run a scenario-specific inventory optimization job.

Run a scenario-specific demand sensing job.

Display data in analytics.

Share data with other users.

NEW QUESTION 23
Where can we see the results of Time Series analysis in SAP IBP?

Time Series Property Attribute in Customer Product

Time Series Property Attribute in Product

Time Series Property Attribute in Customer Source

Time Series Property Attribute in Customer

NEW QUESTION 24
Which of the following are the key features of SAP Supply Chain Control Tower? Note: There are 2 correct Answers to this question.

Ability to create a feasible plan

Ability to use task and case management

Ability to balance demand and supply and attain financial targets

Ability to create smart alerts

NEW QUESTION 25
You want to display and edit data in different units of measure (UOM). Which of the following must you consider before you use UOM? Note: There are 3 correct Answers to this question.

Unit of measure is an attribute of a master data type, such as Product.

Units of measure are usually not time-dependent.

Conversion to the target unit of measure is handled by functionality of SAP IBP Excel UI

Analytics provide the user with the option to select the target unit of measure.

Units of measure are usually not time-independent.

NEW QUESTION 26
You are using the Resource Location master data type. How do you specify capacity supply as time- dependent?

Set the Capacity Supply additional attribute in the time profile.

Set the Capacity Supply Time Series indicator attribute as a key.

Set the Capacity Supply Time Series indicator in the Resource Location master data type.

Maintain the CAPASUPPLY key figure values in the planning area.

NEW QUESTION 27
You want to set up demand sensing to analyze demand changes in execution or close to execution windows. Which of the following conditions must you consider during the setup? Note: There are 2 correct Answers to this question.

Set up the forecast model to be executed at product-location level.

It is mandatory to load historical lag-based snapshot data.

The result generates sensed demand data at the monthly time granularity for the full time horizon.

At setup test the system to run the demand sensing (full) algorithm weekly and the demand sensing (update) on a daily basis.

NEW QUESTION 28
While modeling costs for optimization, you are conscious of the necessity to respect inventory targets and meet demands in the short term. Which of the following are valid relationships between costs you must adhere to? Note: There are 2 correct Answers to this question.

Target inventory violation cost should be greater than inventory holding cost rate.

Target inventory violation cost should be less than max inventory violation cost.

Target inventory violation cost should be greater than discount for demand lateness.

Target inventory violation cost should be less than transportation cost rate.

NEW QUESTION 29
Which of the following are features of lag-based snapshots? Note: There are 2 correct Answers to this question.

Target key figures for these snapshots must have lag as a root attribute.

Lag-based snapshots are automatically assigned to a snapshot operator.

Target key figures for these snapshots are exposed to the user in planning views.

Lag-based snapshots are created in the Configuration app for a fixed time range.

NEW QUESTION 30
What type of key figure requires a planning level to have all attributes as roots?

The attribute transformation key figure, such as PERIODID1

The special key figure marked as an aggregate key figure

The time independent key figure, such as FCSTMAPE

The conversion key figure, such as exchange rate

NEW QUESTION 31
What are the ways to achieve rolling aggregation with SAP IBP?

Using local member

Using attribute as a key figure

Using key figure calculation

Using aggregation mode average

NEW QUESTION 32
Which of the following modes can you use when creating a constrained plan? Note: There are 2 correct Answers to this question.

Profit maximization

Resource maximization

Delivery maximization

Production maximization

NEW QUESTION 33
Which conditions are prerequisites for key figure disaggregation?

The key figure is stored and editable.

The key figure is calculated and editable.

The key figure is calculated and aggregation mode is selected.

The key figure is set to Not Editable.

NEW QUESTION 34
Which supply chain challenge is addressed by SAP IBP for demand?

Inability to arrive at consensus demand

Inability to respond to short-term changes in supply and demand

Inability to synchronize supply and demand

Inability to understand and shape actual demand

NEW QUESTION 35
You need to define a new logic for a key figure to drive values from the PERPRODCUSTREGION level to the PERPRODCUST level. Which of the following configuration options are possible for this process?
Note: There are 2 correct Answers to this question.

Splitting the values from aggregated to detailed level based on stored split-factor key figure

Splitting the values from aggregated to detailed level based on time profile attribute

Splitting the values from aggregated to detailed level using multiplication by the proportions

Splitting the values from detailed to aggregated level by using copy operator

NEW QUESTION 36
You need to create time periods for the time profile in a planning are
a. What should you be aware of when executing the Create Time Periods application job?

The planning area with this time profile must be activated so that the application job can proceed.

This application job cannot be scheduled for immediate start.

A time profile has to be activated so that the application job can proceed.

This application job can be run for multiple time profiles at once.

NEW QUESTION 37
You are configuring disaggregation for the KF1 key figure. Which methods can you apply? Note: There are 3 correct Answers to this question.

An internal system-generated disaggregation

Disaggregation according to an equal split

Disaggregation according to a user-defined expression

Disaggregation in batch triggered by an application job

Proportional disaggregation by using KF2 in the expression

NEW QUESTION 38
Which header name displays are available in the Report Options menu of the SAP IBP Excel interface?
Note: There are 2 correct Answers to this question.

Changed member names that the user had created

Caption, as defined in configuration for the default name

Full unique name including the dimension and technical name

Business meaning, as defined in configuration

NEW QUESTION 39
You are modeling a substitution scenario associated with a promotion. What are some of the Master Data parameters that you need to maintain to ensure desired results generated by the optimizer? Note:
There are 2 correct Answers to this question.

Loc-Prod Subst Valid-From Date

Promotion duration

Location Product Sub Cost Rate

Flag ‘Disable Substitution of Location Products’

NEW QUESTION 40
Which one of the following values can you use in disaggregation expressions?

KF1 (Calculated) + Attribute

If (Attribute)=0

KF1 (Stored) + KF2 (Stored) + Attribute

KF1 (Stored) + Helper KF

Loading …

Prepare For The C-IBP-2105 Question Papers In Advance: https://www.prepawaypdf.com/SAP/C-IBP-2105-practice-exam-dumps.html

C_S4CAM_2202 exam questions for practice in 2022 Updated 91 Questions [Q48-Q63]
SAP C-S4CS-2105 Real Exam Questions and Answers FREE [Q13-Q29]
[Q69-Q90] Free Sales Ending Soon – Use Real C_THR83_2111 PDF Questions [May 23, 2022]
PDF (New 2022) Actual SAP C-C4H410-04 Exam Questions [Q21-Q44]

Real C-IBP-2105 Exam PDF Test Engine Practice Test Questions [Q19-Q40]

SAP C-IBP-2105 Certification Exam Topics:

admin

Leave a Reply Cancel reply

SAP C-IBP-2105 Certification Exam Topics:

Related posts:

admin

You might also like

Leave a Reply Cancel reply