Latest [May 20, 2022] 100% Passing Guarantee – Brilliant H35-211_V2.5 Exam Questions PDF [Q12-Q26]

NO.12 (Radio) Which of the following options can improve the service experience of multicast users when switching
channels (switching time is shorter)

NO.13 The establishment, maintenance and dismantling of the word path between the SIP user and the server are
done through the interaction of the –series of messages, so that every information contained in the SIP text has
a –nature, There is no phenomenon in which a single information value appears multiple times.

NO.14 OLT can perform traffic shaping through service-port.

NO.15 In Huawei’s u2000 management system, when adding network elements, you can only add — ones- when you
access the network element.

NO.16 In the evolution of EPON to 10g EPON, a smooth transition is achieved at the local end by adding AWDM
WDM module, and Odn coexists.

NO.17 The maximum spectroscopic ratio supported by 10G EPON is?

NO.18 (Radio) When the 0LT global or VLAN service template enables the PITP switch, the service port allows the
upstream packet to be carried, the Vendor tag switch, and the user to carry the vendor upstream packet In the
case of tarf information, the following statement regarding olts to PITP message processing strategies is
correct

NO.19 (Radio) When using the siP protocol, you need to use a local number graph for matching, if you use the default
matching mode to match a 7-digit number beginning with 7727, then the following options are available?
The figure is

NO.20 (Multi-select) Network Management U2000 adds line templates to realize the mapping of user traffic flows to
GEM PORTS, including mapping modes(Radio)

NO.21 The (radio) 10G GPON system uses XGEN frames to encapsulate data, and the PORT ID is defined in the
XGEN header as () bits.

NO.22 (Multi-select) VLAN planning principles need to be considered

NO.23 (Multi-select) Use 0TDR to locate the abnormally attenuated location in the optical path, and after the OTDR
is connected to the detected line, which of the following parameters can be set.

NO.24 (Radio) 10G GPON system downlink wavelength is

NO.25 The DBA scheduling of the GPON system is only for the upstream traffic, and the downstream traffic cannot
be scheduled.

NO.26 The auto-discovery methods provided by sight are by network segment mode, ARP mode and routing mode.
At the same time, you can create a network segment or IP address of a device that does not need to be
connected as an exclusion list. Automatically skips the network segment or IP address configured in the
exclusion list during self-discovery of devices.