[Jun-2022] Verified 1Z0-1032-21 dumps Q&As – 1Z0-1032-21 dumps with Correct Answers [Q35-Q55]

4/5 - (2 votes)

[Jun-2022] Verified 1Z0-1032-21 dumps Q&As – 1Z0-1032-21 dumps with Correct Answers

The Best Oracle Responsys Marketing Platform Cloud Service Study Guide for the 1Z0-1032-21 Exam

NO.35 What three actions must you take to set up your new IP fordeliverability success with your major ISPs?
(Choose three.)

Do everything possible to remove lapsed, bounced, or old email addresses to increase the possibility of getting your emails into the inbox.

Set up a backup IP address so you will get through to the inbox even if you are blocked by an ISP.

Automate the daily delivery of Insight Deliverability reports for your warm-up campaigns, especially the Feedback Loop reports to check on true spam complaint rates.

Ensure that your warm-up audiencelists consist of recently opted-in, opened/clicked within the last few months, or are known brand advocates.

NO.36 How should you set up files that list all the daily Opt-In and Opt-Out events collected by Responsys?

Create a SQL view that retrieves the Opt value column. Using Oracle Database Developer, connect to your Responsys database andpull the view data.

In Program, you can use the SetData element to set this value to a supplemental table created to collect this information. The supplemental table can then be exported on a daily basis.

An export of the profile list can be done ona daily basis. From this file, the Opt-In and Opt-Out can be extracted using a tool such as Excel.

An Event Data Feed export can be created to run on a daily basis with Opt-In and Opt-Out event types selected.

NO.37 You were in the middle of implementing a new campaign when you were pulled out of it to handle another priority. You now have time to return to configuring the campaignrequirements, but are not sure what requirements you completed and what still need to be addressed.
What steps should you take to understanding the remaining issues that require further configuration in Responsys?

Navigate to the Workbook and click the EMD button.

Navigate to the Version Test screen and click the Workbook button.

Navigate to the Workbook and click the Version Test button.

Navigate to the Workbook and click the Validate button.

NO.38 You created a specific filter for the individuals that you want to send a campaign to.
What are the steps to define this filter to be used in a campaign?

Locate the campaign in the Manage Campaign section, navigate to the Campaigns workbook, and configure the filter in the Proofing section.

Navigate to the Program Designer, select the Testing tab, open the program that uses the campaign, and select the filter from the Program Settings.

Navigate to the Program Designer, open the program that uses the campaign, and select the filter from the Program Settings.

Locate the campaignin the Manage Campaign section, navigate to the Campaigns workbook, and assign the filter in the Audiences section.

Go to the Data Sources section, select the Filters tab, and then select the campaign from the listing.

NO.39 Which statement describes the requirements to set up a Responsys primary data gateway solution for the secure transferring of data?

The Responsys Data Gateway consists of only an API layer, using AuthO authentication to transfer data.

The Responsys Data Gateway consists of a dedicated database server that can be accessed securely using a VPN setup specifically for a client account.

To install the Responsys Data Gateway, you provide each client an encryption appliance that is configured to directly connect to their Responsys database instance. All data transfer occurs through the appliance.

The Responsys Data Gateway requires a dedicated SFTP account that isaccessed via a secure shell (SSH2) protocol. A customer must provide a public SSH2 key for authentication.

NO.40 Which statement is true about how you must configure a Responsys Profile list so you can beginsending Mobile SMS campaigns?

You only need to define the COUNTRY_ code if you are sending SMS messages to subscribers outside of the default country setting for your account.

You can only modify profile lists used for mobile campaigns through Connect uploads.

You can use the same Profile list for mobile campaigns that you are currently using for email campaigns.

All the data that you need to use to personalize mobile messages must be stored as columns in the Profile list.

NO.41 You have a banner image in an HTML file with clickthrough reference. It is named acme_marquee.htm and you have uploaded it into a folder named LOGOS in your Content Library.You want to insert it into the HTML campaign document that has been uploaded to the Responsys Content Library into the HTML campaign document.
Which RPL code should you use to insert this document?

<#assign banner=”acme_marquee. htm”><#include “cms: //contentlibrary/ ” + banner>

<document=”${//all content/. . /acme_marquee.htm}”>

<$insertdocument “cms : //contentlibrary/LOGOS/acme_marquee . htm”>

<#include “cms : //contentlibrary/LOGOS/acme_marquee . htm”>

NO.42 You received an error in EMD regarding the assign syntax you have written to declare a variable using RPL.
What is the correct syntax for assign?

/assign/

?assign?

<# assign>

! assign

NO.43 A third-party system exportof data that is required to be imported as supplemental table data in Responsys is in XML format. The XML file is located on the SFTP server and ready for you to configure the Connect import job in Responsys.
What is your next step?

Discuss with theteam that Responsys doesn’t accept XML formatting for importing Supplemental Table data and a solution to transform the data will be required.

Create an Import Supplemental Table job in Responsys for this file and ensure to select the XML to CSV conversion check box.

Create an Import Supplemental Table job in Responsys for this file.

Create an Import Supplemental Table job in Responsys for this file and select XML as the Fields are delimited check box.

NO.44 You uploaded into the Responsys Content Library an HTML document and three subdocuments personalized with the member level of the subscriber. When you validate the campaign, you get this error: “Email Message preview failed because of template execution runtime error, detailed error: property MEMBER_LEVEL for datasource CONTACTS is not defined in the datasources.” How should you correct this error?

Open each HTML document in the package and declare the MEMBER_LEVEL field by using the RPL directive<#field> in every document. Then reupload the documents into the Content Library.

You did not select the MEMBER_LEVEL column from the CONTACTS database. In the Datasources Section in the Campaign workbook, select the MEMBER_LEVEL field and make sure the aliasmatches what is in the HTML code. Responsys will now be able to insert values for that column at run time.

The MEMBER_LEVEL field is a Responsys reserved word and cannot be used for personalization.

The HTML coder didn’t include the <#data> directiveand declare the CONTACTS data source in each document. Enter this into each document, and the error should now be resolved.

NO.45 One of the top ISPs is blocking promotional emails coming from your domain. This has not happened before.
You check the deliverability metrics on Responsys reports for the emailcampaigns sent in the last two weeks.
What are two reasons why this is happening? (Choose two.)

Hard bounce rates are 10% or higher.

Recipients are forwarding your emails to everyone in their address books.

Your open rates have dropped somewhatsince last month.

The ISP is recording a high number of spam trap hits and complaint rates from recipients.

Substantial (5%) increase in click-through rates on last week’s promotional campaign.

NO.46 You are planningan integration of Salesforce.com and Responsys. You navigate to the Account Administration screen to configure the access to Salesforce.com, but the configuration options are not available.
What is the reason for this?

You need to work with Salesforce.com technical resources to configure the gateway to Responsys from within the Salesforce.com application.

You need to create a new user specifically for Responsys from within the Salesforce.com application.

Responsys Customer Support must first enable the Salesforce integration functionality before the Account Administrator can configure the access between Salesforce.com and Responsys.

You must first create a new Salesforce Connect job to enable the automated data feed between the Salesforce.com and Responsys contacts lists.

NO.47 You’re creating an Opt-In form for your client. After a new customer submits the subscription form, you want to wait for 24 hours and then send them afollow-up email with a discount offer.
How should you create a form rule to accomplish this?

Create a form rule to trigger a custom event. Set up a program to listen for this customer event, wait for
24 hours, then send the follow-up email offer.

Create a form rule that directs the new customer to a URL so they can enter their email address and request the discount coupon.

Create a form rule to populate a table with the submitted data, then schedule a campaign 24 hours later to send all newly entered subscribers the follow-up email.

Create a form rule that schedules a transactional email campaign with the offer 24 hours after each form submission.

Create a form rule to trigger a follow-up email message to the form submitter. In the form rule, specify a
24-hour delay before sending the email.

NO.48 Your client wants to ensure that their Event Data Feeds are secure while the files are stored on the server.
What step should you take to encrypt the files?

Import a private encryption key the customer created to be used when the export runs.

Import a public encryption key the customer created to be used when the export runs.

Create new credentials specifically for the export job that no one knows and that passes the Responsys password integrity checker.

Create a Responsys security key in the Account Administration screen. Import this key when creating the export.

NO.49 You need to comment your RPL code so that it doesn’t get generated in the source HTML for a campaign.

<!– and –>

<#– and –>

<<– !~ –>

NO.50 An SSH2 key pair can be created to be used for authentication to establish a secure connection between your server and the Oracle file server.
Which key from the client key pair must you send to Responsys?

Private

Public

Secure

Master

NO.51 You are creating an email campaign and you have a spreadsheet of contact email addresses and profile data that the campaign should be sent to for testing purposes.
How should you input this information into Responsys?

Using Connect, create a Seed Group import job. The spreadsheet will need to be converted to a comma-delimited file before importing it.

Using Program, create a Proof List import job. The spreadsheet will need to be converted to a comma-delimited le to import.

In the Manage List screen, ensure the list for the campaign is selected and then select the Seed Groups tab. Create a Seed Group list with the contact information from the spreadsheet.

In the Campaign workbook, select the Proofing Import Wizard button. Import the spreadsheet and ensure that it is convertedto a comma-delimited file before importing it.

NO.52 You are designing a messaging campaign that needs personalization data for your contacts from a supplemental data source.
How should you join or reference data from the table?

After you have defined the relationship between a profile list and a supplemental table, the only way you can change or undo it is to delete the supplemental table and redefine it.

The number of records in the supplemental table cannot exceed the total number of records in the profile list.

Youmust make sure that a Data Extraction Key field matches an existing field (in name and type) in a table being used for the campaign.

You must have a one-to-one relationship between a profile list record and a record in the supplemental table.

NO.53 In RPL, how do you reference a value in a data source?

data_source.field_name

fieldname

project_name.field_name

data_source_alias.filed_name_alias

NO.54 Which three steps should you take to set up your client’s data model to support email campaigns during data discovery implementation? (Choose three.)

Ensure thatfield names are not duplicated in profile lists and profile extension tables to avoid confusion during personalization or targeting steps in the Responsys campaign design process.

Map a field that the client uses to uniquely identify each subscriber tothe RIID_ field in the contacts list.

Map the subscriber email address to the EMAIL_ADDRESS__ field in the contacts list to be used for messaging.

Map a field that the client uses to uniquely identify each subscriber to either CUSTOMER_ID_ or EMAIL_ADDRESS_field in the contacts list.

Encourage your client to add as many custom fields as possible to the profile list to increase processing efficiency, thereby eliminating the need for profile extension tables.

NO.55 Your profile list is named CONTACTS. Your supplemental table is ORDERS with a Data Extraction Key of CUSTOMER_ID_ and a Primary Key of ORDER_ID, with TOTAL_ORDER_DOLLARS as a column. You design acampaign to display the ORDER_ID and TOTAL_ORDER_DOLLARS with a default value of 0 (zero) from the ORDERS table for each recipient in the target audience from your CONTACTS list.
What happens if there are multiple matches (more than one ORDER_ID) for a CUSTOMER_ID?

Because multiple matches with a record in the CONTACTS list exist in the ORDERS supplemental table, no matching values will be pulled at all, and the default value of 0 (zero) will be used for every email generated.

The campaign launch will error out when Responsys detects multiple matches with the CONTACI’S list from the ORDERS table.

When multiple matches with a record in the CONTACTS list exist in the ORDERS supplemental table, the first found match will be used in the campaign.

During the campaign worklist build, Responsys will pause and ask you to select the correct record to use for the campaign personalization.

1Z0-1032-21 certification guide Q&A from Training Expert PrepAwayPDF: https://www.prepawaypdf.com/Oracle/1Z0-1032-21-practice-exam-dumps.html

[Jun-2022] Verified 1Z0-1032-21 dumps Q&As – 1Z0-1032-21 dumps with Correct Answers [Q35-Q55]

admin

Leave a Reply Cancel reply

Related posts:

admin

You might also like

Leave a Reply Cancel reply