[Q63-Q78] H12-211 Actual Questions 100% Same Braindumps with Actual Exam!

Q63. Which of the following statement about ilpv6 address configuration is correct? (Multiple choice)

Q64. When using VRP, which of the following commands is used to configure the data link layer encapsulation type of a serial interface as HDLC?

Q65. The following statement on the RIP network size is correct

Q66. Refer to the graphic. GE0/0/1 and GE0/0/2 on the switch are configured as hybrid interfaces. Which of the following statements are true? (Choose all that apply)

Q67. When a source end uses application software to send an image file through a network, the TCP/IP encapsulation process of the file is : Data -> Segment -> packet -> Frame -> Bit.

Q68. In the STP protocol, set all the switches are configured the same priority, the MAC address of switch 1 00-e0-fc-00-00-40, the MAC address of the switch 2 00-e0-fc-00-00 -10, the MAC address of the switch 3 00-e0-fc-00-00-20, the MAC address of the switch 4 is 00-e0fc-00-00-80, is the root switch should be

Q69. () Is used to view the IP datagrams from one host to another host through the route.

Q70. As shown in the figure, the host has established a connection with the router through Telnet. For the data sent by the host to the router, the following description is positive.
Indeed (). (multiple choice)

Q71. Compared to STP protocol, which kind of port role is added in RSTP protocol? (Multiple Choice)

Q72. The client has an error accessing the FTP server. If there is no problem checking the connectivity between the server and the client, then which servers are possible?
Is the port blocked? (choose 2 answers)

Q73. When two switches use link aggregation technology for interconnection, which of the following conditions do each member port need to meet? (multiple choice)

Q74. OSI reference model of the network is divided into () layer

Q75. The following statement on the routing priority, the right is

Q76. Switch receives the data frame header, the header’s destination MAC address based forwarding frames immediately, this is called forward mode () forward mode

Q77. Relative to the HUB second floor switch which has the following advantages

Q78. In the OSI reference model, which defines the level of data transfer needed to achieve the mechanical, electrical, functional characteristics and processes and other means?