Unique Top-selling NSE4_FGT-7.0 Exams - New 2023 Fortinet Pratice Exam [Q30-Q53]

Rate this post

Unique Top-selling NSE4_FGT-7.0 Exams – New 2023 Fortinet Pratice Exam

Fortinet NSE 4 Dumps NSE4_FGT-7.0 Exam for Full Questions – Exam Study Guide

To prepare for the NSE4_FGT-7.0 exam, candidates should have a solid understanding of network security concepts and experience working with Fortinet security solutions. Fortinet offers a range of resources to help candidates prepare for the exam, including study guides, practice exams, and hands-on labs. Candidates should also familiarize themselves with the exam objectives and ensure they have a thorough understanding of the topics covered in the exam.

Fortinet NSE4_FGT-7.0 exam focuses on the FortiOS 7.0 operating system, which is the latest version of Fortinet’s security operating system. NSE4_FGT-7.0 exam covers topics such as network security concepts, firewall policies, VPN configurations, user authentication, web filtering, and intrusion prevention. The Fortinet NSE4_FGT-7.0 exam is a comprehensive test that assesses the candidate’s ability to design, implement, and manage Fortinet security solutions.

NEW QUESTION 30
Refer to the exhibit.

The exhibit shows proxy policies and proxy addresses, the authentication rule and authentication scheme, users, and firewall address.
An explicit web proxy is configured for subnet range 10.0.1.0/24 with three explicit web proxy policies.
The authentication rule is configured to authenticate HTTP requests for subnet range 10.0.1.0/24 with a form-based authentication scheme for the FortiGate local user database. Users will be prompted for authentication.
How will FortiGate process the traffic when the HTTP request comes from a machine with the source IP
10.0.1.10 to the destination http://www.fortinet.com? (Choose two.)

If a Mozilla Firefox browser is used with User-B credentials, the HTTP request will be allowed.

If a Google Chrome browser is used with User-B credentials, the HTTP request will be allowed.

If a Mozilla Firefox browser is used with User-A credentials, the HTTP request will be allowed.

If a Microsoft Internet Explorer browser is used with User-B credentials, the HTTP request will be allowed.

NEW QUESTION 31
Which CLI command allows administrators to troubleshoot Layer 2 issues, such as an IP address conflict?

get system status

get system performance status

diagnose sys top

get system arp

NEW QUESTION 32
Examine the network diagram shown in the exhibit, then answer the following question:

Which one of the following routes is the best candidate route for FGT1 to route traffic from the Workstation to the Web server?

172.16.0.0/16 [50/0] via 10.4.200.2, port2 [5/0]

0.0.0.0/0 [20/0] via 10.4.200.2, port2

10.4.200.0/30 is directly connected, port2

172.16.32.0/24 is directly connected, port1

NEW QUESTION 33
Which scanning technique on FortiGate can be enabled only on the CLI?

Heuristics scan

Trojan scan

Antivirus scan

Ransomware scan

NEW QUESTION 34
Which two statements about SSL VPN between two FortiGate devices are true? (Choose two.)

The client FortiGate requires a client certificate signed by the CA on the server FortiGate.

The client FortiGate requires a manually added route to remote subnets.

The client FortiGate uses the SSL VPN tunnel interface type to connect SSL VPN.

Server FortiGate requires a CA certificate to verify the client FortiGate certificate.

NEW QUESTION 35
An administrator wants to configure Dead Peer Detection (DPD) on IPSEC VPN for detecting dead tunnels.
The requirement is that FortiGate sends DPD probes only when no traffic is observed in the tunnel.
Which DPD mode on FortiGate will meet the above requirement?

Disabled

On Demand

Enabled

On Idle

NEW QUESTION 36
Refer to the exhibit.

The exhibit shows the IPS sensor configuration.
If traffic matches this IPS sensor, which two actions is the sensor expected to take? (Choose two.)

The sensor will allow attackers matching the NTP.Spoofed.KoD.DoS signature.

The sensor will block all attacks aimed at Windows servers.

The sensor will reset all connections that match these signatures.

The sensor will gather a packet log for all matched traffic.

NEW QUESTION 37
To complete the final step of a Security Fabric configuration, an administrator must authorize all the devices on which device?

FortiManager

Root FortiGate

FortiAnalyzer

Downstream FortiGate

NEW QUESTION 38
What is the limitation of using a URL list and application control on the same firewall policy, in NGFW policy-based mode?

It limits the scope of application control to the browser-based technology category only.

It limits the scope of application control to scan application traffic based on application category only.

It limits the scope of application control to scan application traffic using parent signatures only

It limits the scope of application control to scan application traffic on DNS protocol only.

NEW QUESTION 39
Why does FortiGate Keep TCP sessions in the session table for several seconds, even after both sides (client and server) have terminated the session?

To allow for out-of-order packets that could arrive after the FIN/ACK packets

To finish any inspection operations

To remove the NAT operation

To generate logs

NEW QUESTION 40
Refer to the exhibit.

Based on the raw log, which two statements are correct? (Choose two.)

Traffic is blocked because Action is set to DENY in the firewall policy.

Traffic belongs to the root VDOM.

This is a security log.

Log severity is set to error on FortiGate.

NEW QUESTION 41
A FortiGate is operating in NAT mode and configured with two virtual LAN (VLAN) sub interfaces added to the physical interface.
Which statements about the VLAN sub interfaces can have the same VLAN ID, only if they have IP addresses in different subnets.

The two VLAN sub interfaces can have the same VLAN ID, only if they have IP addresses in different subnets.

The two VLAN sub interfaces must have different VLAN IDs.

The two VLAN sub interfaces can have the same VLAN ID, only if they belong to different VDOMs.

The two VLAN sub interfaces can have the same VLAN ID, only if they have IP addresses in the same subnet.

NEW QUESTION 42
Refer to the exhibit, which contains a static route configuration.

An administrator created a static route for Amazon Web Services.
What CLI command must the administrator use to view the route?

get router info routing-table all

get internet service route list

get router info routing-table database

diagnose firewall proute list

NEW QUESTION 43
Which two settings can be separately configured per VDOM on a FortiGate device? (Choose two.)

System time

FortiGuaid update servers

Operating mode

NGFW mode

NEW QUESTION 44
Refer to the exhibits.

The exhibits show the SSL and authentication policy (Exhibit A) and the security policy (Exhibit B) tor Facebook.
Users are given access to the Facebook web application. They can play video content hosted on Facebook but they are unable to leave reactions on videos or other types of posts.
Which part of the policy configuration must you change to resolve the issue?

The SSL inspection needs to be a deep content inspection.

Force access to Facebook using the HTTP service.

Additional application signatures are required to add to the security policy.

Add Facebook in the URL category in the security policy.

NEW QUESTION 45
Which two statements are true about the FGCP protocol? (Choose two.)

Not used when FortiGate is in Transparent mode

Elects the primary FortiGate device

Runs only over the heartbeat links

Is used to discover FortiGate devices in different HA groups

NEW QUESTION 46
Which three statements about a flow-based antivirus profile are correct? (Choose three.)

IPS engine handles the process as a standalone.

FortiGate buffers the whole file but transmits to the client simultaneously.

If the virus is detected, the last packet is delivered to the client.

Optimized performance compared to proxy-based inspection.

Flow-based inspection uses a hybrid of scanning modes available in proxy-based inspection.

NEW QUESTION 47
Refer to the exhibit.

Given the routing database shown in the exhibit, which two statements are correct? (Choose two.)

The port3 default route has the highest distance.

The port3 default route has the lowest metric.

There will be eight routes active in the routing table.

The port1 and port2 default routes are active in the routing table.

NEW QUESTION 48
An administrator does not want to report the logon events of service accounts to FortiGate. What setting on the collector agent is required to achieve this?

Add the support of NTLM authentication.

Add user accounts to Active Directory (AD).

Add user accounts to the FortiGate group fitter.

Add user accounts to the Ignore User List.

NEW QUESTION 49
Refer to the exhibit showing a debug flow output.

Which two statements about the debug flow output are correct? (Choose two.)

The debug flow is of ICMP traffic.

A firewall policy allowed the connection.

A new traffic session is created.

The default route is required to receive a reply.

NEW QUESTION 50
What inspection mode does FortiGate use if it is configured as a policy-based next-generation firewall (NGFW)?

Full Content inspection

Proxy-based inspection

Certificate inspection

Flow-based inspection

NEW QUESTION 51
Refer to the exhibit.

Based on the administrator profile settings, what permissions must the administrator set to run the diagnose firewall auth list CLI command on FortiGate?

Custom permission for Network

Read/Write permission for Log & Report

CLI diagnostics commands permission

Read/Write permission for Firewall

NEW QUESTION 52
Which of the following statements about backing up logs from the CLI and downloading logs from the GUI are true? (Choose two.)

Log downloads from the GUI are limited to the current filter view

Log backups from the CLI cannot be restored to another FortiGate.

Log backups from the CLI can be configured to upload to FTP as a scheduled time

Log downloads from the GUI are stored as LZ4 compressed files.

NEW QUESTION 53
Refer to the exhibits.
Exhibit A.

Exhibit B.

An administrator creates a new address object on the root FortiGate (Local-FortiGate) in the security fabric. After synchronization, this object is not available on the downstream FortiGate (ISFW).
What must the administrator do to synchronize the address object?