Latest D-PE-FN-01 Exam Real Tests Free Updated Today [Q24-Q43]

Rate this post

Latest D-PE-FN-01 Exam Real Tests Free Updated Today

D-PE-FN-01 Real Exam Question Answers Updated [Dec 04, 2025]

NEW QUESTION 24
An administrator is tasked with updating firmware on several remote servers without interrupting the operating system. Which method should they use?

Utilize iDRAC

Implement OpenManage Enterprise

Set up System Setup

Clone the OS configuration

NEW QUESTION 25
Which open-source operating system is recommended as an alternative for file sharing, supporting NFS and Samba on Dell PowerEdge servers?

Ubuntu

Kali Linux

Red Hat Linux

SUSE Linux

NEW QUESTION 26
Which firmware interface is known for providing faster boot times?

GPT

CMOS

MBR

BIOS

UEFI

NEW QUESTION 27
An administrator attempts to log in to the iDRAC interface of a server using a web browser. The iDRAC prompts for a username and password. What security process is the iDRAC initiating by requesting these login credentials?

Configure system lockdown mode

Implement role-based access control

Perform user authentication

Establish user authorization levels

NEW QUESTION 28
A technician is verifying the throughput of SAS drives connected to a PERC 10 controller. What is the maximum data transfer rate achievable when using SAS 3.0 compliant drives with a PERC 10 controller?

3Gb/sec

22.5Gb/sec

12Gb/sec

6Gb/sec

NEW QUESTION 29
A data center is designed with cold aisle containment. How are cold aisles used in this design to manage server temperatures?

Isolate the cold aisle to prevent any airflow from the hot aisle.

Direct hot exhaust air from the servers into the cold aisle.

Pump cold air into the cold aisle for server intake.

Recirculate hot air within the cold aisle to preheat intake air.

NEW QUESTION 30
For VMs requiring independent and self-contained network operation that is isolated from both the host and any external networks, which virtual switch type should be chosen?

Physical

External

Internal

Private

NEW QUESTION 31
A system administrator is unable to access the hypervisor by hostname. However, the hypervisor is responding to pings using the IP address. Which server role should be investigated?

WINS

ARP

DHCP

DNS

NEW QUESTION 32
A telecommunications company is expanding its services to edge locations and requires servers that can handle full enterprise-level compute but fit in limited telecom spaces. Which feature of edge-optimized PowerEdge servers is most critical for deployment in telecommunications environments?

Their GPU-optimized configurations for graphic-intensive applications

Their specialized modules for high-density computing in controlled data centers

Their rugged design for withstanding extreme outdoor conditions

Their minimal footprint that is combined with full PowerEdge features and management

NEW QUESTION 33
A company wants to run multiple operating systems on the same server without the overhead of a host operating system. Which type of solution should they use?

Containerization

Cloud-based visualization

Type 2 hypervisor

Type 1 hypervisor

NEW QUESTION 34
Power supply unit 2 (PSU 2) on a Dell PowerEdge R760 server has been losing power several times a day.
The system administrator is planning to replace the power supply but is unsure which power supply is referenced as PSU 2. What is the most reliable way for the system administrator to visually identify PSU 2?

Check the chassis label near the power supplies for PSU numbers

Assume PSU 2’s LEDs are off because the iDRAC has disabled it

Use the iDRAC web UI to activate the blink option for PSU 2’s LED

Look for a constant amber LED on PSU 1, indicating a problem with that unit

NEW QUESTION 35
A large enterprise requires a server that can handle high-performance computing tasks and large-scale virtualization. Which type of Dell PowerEdge server should they consider?

Deploy a modular server

Deploy a rack server

Deploy a tower server

Deploy a micro server

NEW QUESTION 36
Which iDRAC feature enables administrators to directly connect a laptop for initial server implementation and IP configuration?

Access iDRAC Auto Discovery for automatic IP assignment

Use iDRAC Direct for laptop connection and initial setup

Utilize the iDRAC Virtual Console for direct IP setup

Employ iDRAC Remote File Share for initial configuration

NEW QUESTION 37
A business requires a storage protocol for their enterprise servers that can handle substantial storage and backup workloads and is compatible with SATA technology. Which protocol is ideal for enterprises needing significant storage and backup and is compatible with SATA?

NVMe

SAS

iSCSI

EDSFF

NEW QUESTION 38
A data center is designed with cold aisle containment. How are cold aisles used in this design to manage server temperatures?

Recirculate hot air within the cold aisle to preheat intake air.

Direct hot exhaust air from the servers into the cold aisle.

Pump cold air into the cold aisle for server intake.

Isolate the cold aisle to prevent any airflow from the hot aisle.

NEW QUESTION 39
A company is designing its backup infrastructure and must decide where to store the backed-up data. They are considering both on-site and off-site options. Which storage media are commonly used in backup solutions for storing and archiving backup data?

Network Attached Storage (NAS)

Solid state drives (SSDs) and NVMe drives

SAN arrays

Random Access Memory (RAM) and CPU cache

Hard disks

NEW QUESTION 40
You must enhance the scalability and connectivity flexibility of a PowerEdge server, particularly for management and peripheral connections. Which type of onboard card is explicitly designed to increase scalability, flexibility, and connectivity options in PowerEdge servers beyond basic networking?

Open Compute Project (OCP) card

Rear Input Output (RIO) card

LAN On Motherboard (LOM)

Integrated system board network controller

NEW QUESTION 41
An engineer must locate the latest Dell Update Package for a specific PowerEdge server model running Windows Server 2022. Which initial step should the engineer take to begin this process?

Access the iDRAC interface of the server and navigate to the update section.

Contact Dell support to request the specific update package.

Open the Dell Support website and go to the “Drivers & Downloads” page.

Utilize OpenManage Enterprise to search for available updates for the server.

NEW QUESTION 42
What is the primary function of the Silicon Root of Trust in Dell PowerEdge servers?

To manage virtual machine migrations across clusters

To provide cryptographic verification of firmware and hardware integrity from the factory

To optimize cooling efficiency based on workload demands

To enable automatic failover in high-availability configurations

NEW QUESTION 43
A system administrator must access the iDRAC user interface of a Dell PowerEdge 16G server for the first time. What type of password is used by default to log in to the iDRAC UI on PowerEdge 16G servers, enhancing initial security?

Use the legacy default “root” and “calvin” credentials

Utilize a user-defined password set during server setup

Enter a blank password for the initial iDRAC UI login

Employ a factory-generated password found on the Service Tag

EMC D-PE-FN-01 Exam Syllabus Topics:

Topic	Details
Topic 1	Security: This section of the exam measures the skills of Server Support Engineers and emphasizes the security features embedded in Dell PowerEdge servers. It includes hardware-based protections such as Silicon Root of Trust, TPM 2.0, and Secure Boot. The section also covers iDRAC’s role in automated security, data protection using Self-Encrypting Drives (SEDs), and access control measures like Multifactor Authentication (MFA) and Role-Based Access Control (RBAC).
Topic 2	Server Architecture and Roles: This section of the exam measures the skills of Server Support Engineers and focuses on understanding how various PowerEdge server types—like rack, tower, and blade servers—fit specific deployment needs. It covers interpreting server data flow, exploring storage topologies like DAS, NAS, and SAN, and understanding virtualization using hypervisors. The section also outlines how to position PowerEdge servers in edge, cloud, or core environments for use cases such as HPC, file sharing, or AI workloads.
Topic 3	Server Management: This section of the exam measures the skills of Server Support Engineers and addresses server management concepts, including in-band and out-of-band management. It compares Dell management utilities, explains BIOS vs. UEFI, and introduces at-the-box management. The section also explores iDRAC versions and the features of the Dell OpenManage System Administrator Suite (OMSA) to ensure engineers can monitor and manage PowerEdge servers effectively.
Topic 4	Maintenance: This section of the exam measures the skills of Data Center Technicians and covers practical server maintenance procedures. Topics include handling memory and expansion cards, understanding power distribution, recognizing hardware fault indicators, and applying various firmware update methods. It also touches on thermal management through cooling techniques such as air, liquid, and immersion cooling, along with proper shutdown and reboot practices.
Topic 5	Server Networking and Connectivity: This section of the exam measures the skills of Data Center Technicians and focuses on the fundamentals of networking services as they relate to PowerEdge servers. It includes identifying network cables and connections, and comparing different onboard network options. This knowledge is essential for establishing and maintaining server connectivity within diverse infrastructure environments.

Latest D-PE-FN-01 Study Guides 2025 – With Test Engine PDF: https://www.prepawaypdf.com/EMC/D-PE-FN-01-practice-exam-dumps.html

EMC D-PE-FN-01 Exam Syllabus Topics:

Related posts:

admin

You might also like

Leave a Reply Cancel reply