Updated Dec 23, 2025 NSE8_812 Exam Dumps – PDF Questions and Testing Engine [Q51-Q68]

QUESTION 51
Refer to the exhibit.

What is happening in this scenario?

The user status changed at FortiClient EMS to off-net.

The user is authenticating against a FortiGate Captive Portal.
C The user is authenticating against an IdP.

The user has not authenticated on their external browser.

QUESTION 52
You are troubleshooting a FortiMail Cloud service integrated with Office 365 where outgoing emails are not reaching the recipients’ mail What are two possible reasons for this problem? (Choose two.)

The FortiMail access control rule to relay from Office 365 servers FQDN is missing.

The FortiMail DKIM key was not set using the Auto Generation option.

The FortiMail access control rules to relay from Office 365 servers public IPs are missing.

A Mail Flow connector from the Exchange Admin Center has not been set properly to the FortiMail Cloud FQDN.

QUESTION 53
Which two statements about bounce address tagging and verification (BATV) on FortiMail are true? (Choose two.)

You must publish the BATV public key as a DNS TXT record.

Emails with an empty sender address will be subjected to bounce verification.

FortiMail will insert the BATV tag to the sender address in the envelope.

BATV will use symmetric keys to verify the bounce address tag.

QUESTION 54
Refer to the exhibits.
Exhibit A

Exhibit B

Exhibit C

A customer is trying to set up a VPN with a FortiGate, but they do not have a backup of the configuration. Output during a troubleshooting session is shown in the exhibits A and B and a baseline VPN configuration is shown in Exhibit C Referring to the exhibits, which configuration will restore VPN connectivity?

QUESTION 55
You are migrating the branches of a customer to FortiGate devices. They require independent routing tables on the LAN side of the network.
After reviewing the design, you notice the firewall will have many BGP sessions as you have two data centers (DC) and two ISPs per DC while each branch is using at least 10 internal segments.
Based on this scenario, what would you suggest as the more efficient solution, considering that in the future the number of internal segments, DCs or internet links per DC will increase?

No change in design is needed as even small FortiGate devices have a large memory capacity.

Acquire a FortiGate model with more capacity, considering the next 5 years growth.

Implement network-id, neighbor-group and increase the advertisement-interval

Redesign the SD-WAN deployment to only use a single VPN tunnel and segment traffic using VRFs on BGP

QUESTION 56
Refer to the exhibit.

You are operating an internal network with multiple OSPF routers on the same LAN segment. FGT_3 needs to be added to the OSPF network and has the configuration shown in the exhibit. FGT_3 is not establishing any OSPF connection.
What needs to be changed to the configuration to make sure FGT_3 will establish OSPF neighbors without affecting the DR/BDR election?

QUESTION 57
Refer to the exhibit showing a FortiSOAR playbook.

You are investigating a suspicious e-mail alert on FortiSOAR, and after reviewing the executed playbook, you can see that it requires intervention.
What should be your next step?

Go to the Incident Response tasks dashboard and run the pending actions

Click on the notification icon on FortiSOAR GUI and run the pending input action

Run the Mark Drive by Download playbook action

Reply to the e-mail with the requested Playbook action

QUESTION 58
Refer to the exhibit showing an SD-WAN configuration.

According to the exhibit, if an internal user pings 10.1.100.2 and 10.1.100.22 from subnet 172.16.205.0/24, which outgoing interfaces will be used?

port16 and port1

port1 and port1

port16 and port15

port1 and port15

QUESTION 59
Which two methods are supported for importing user defined Lookup Table Data into the FortiSIEM? (Choose two.)

Report

FTP

API

SCP

QUESTION 60
An automation stitch was configured using an incoming webhook as the trigger named ‘my_incoming_webhook’. The action is configured to execute the CLI Script shown:

QUESTION 61
Refer to the exhibit showing FortiGate configurations

FortiManager VM high availability (HA) is not functioning as expected after being added to an existing deployment.
The administrator finds that VRRP HA mode is selected, but primary and secondary roles are greyed out in the GUI The managed devices never show online when FMG-B becomes primary, but they will show online whenever the FMG-A becomes primary.
What change will correct HA functionality in this scenario?

Change the FortiManager IP address on the managed FortiGate to 10.3.106.65.

Make the monitored IP to match on both FortiManager devices.

Unset the primary and secondary roles in the FortiManager CLI configuration so VRRP will decide who is primary.

Change the priority of FMG-A to be numerically lower for higher preference

QUESTION 62
Review the following FortiGate-6000 configuration excerpt:

Based on the configuration, which statement is correct regarding SNAT source port partitioning behavior?

It dynamically distributes SNAT source ports to operating FPCs or FPMs.

It is the default SNAT configuration and preserves active sessions when an FPC or FPM goes down.

It statically distributes SNAT source ports to operating FPCs or FPMs

It equally distributes SNAT source ports across chassis slots.

QUESTION 63
Refer to the exhibit containing the configuration snippets from the FortiGate. Customer requirements:

* SSLVPN Portal must be accessible on standard HTTPS port (TCP/443)
* Public IP address (129.11.1.100) is assigned to portl
* Datacenter.acmecorp.com resolves to the public IP address assigned to portl The customer has a Let’s Encrypt certificate that is going to expire soon and it reports that subsequent attempts to renew that certificate are failing.
Reviewing the requirement and the exhibit, which configuration change below will resolve this issue?

QUESTION 64
Which two statements are correct on a FortiGate using the FortiGuard Outbreak Protection Service (VOS)? (Choose two.)

The FortiGuard VOS can be used only with proxy-base policy inspections.

If third-party AV database returns a match the scanned file is deemed to be malicious.

The antivirus database queries FortiGuard with the hash of a scanned file

The AV engine scan must be enabled to use the FortiGuard VOS feature

The hash signatures are obtained from the FortiGuard Global Threat Intelligence database.

QUESTION 65
Refer to the exhibits.

A customer is looking for a solution to authenticate the clients connected to a hardware switch interface of a FortiGate 400E.
Referring to the exhibits, which two conditions allow authentication to the client devices before assigning an IP address? (Choose two.)

FortiGate devices with NP6 and hardware switch interfaces cannot support 802.1X authentication.

Devices connected directly to ports 3 and 4 can perform 802 1X authentication.

Ports 3 and 4 can be part of different switch interfaces.

Client devices must have 802 1X authentication enabled

The customer wants to deploy a solution to authenticate the clients connected to a hardware switch interface of a FortiGate 400E device. A hardware switch interface is an interface that combines multiple physical interfaces into one logical interface, allowing them to act as a singleswitch with one IP address and one set of security policies. The customer wants to use 802.1X authentication for this solution, which is a standard protocol for port-based network access control (PNAC) that authenticates clients based on their credentials before granting them access to network resources. One condition that allows authentication to the client devices before assigning an IP address is that devices connected directly to ports 3 and 4 can perform 802.1X authentication. This is because ports 3 and 4 are part of the hardware switch interface named “lan”, which has an IP address of 10.10.10.254/24 and an inbound SSL inspection profile named “ssl-inspection”. The inbound SSL inspection profile enables the FortiGate device to intercept and inspect SSL/TLS traffic from clients before forwarding it to servers, which allows it to apply security policies and features such as antivirus, web filtering, application control, etc. However, before performing SSL inspection, the FortiGate device needs to authenticate the clients using 802.1X authentication, which requires the clients to send their credentials (such as username and password) to the FortiGate device over a secure EAP (Extensible Authentication Protocol) channel. The FortiGate device then verifies the credentials with an authentication server (such as RADIUS or LDAP) and grants or denies access to the clients based on the authentication result. Therefore, devices connected directly to ports 3 and 4 can perform 802.1X authentication before assigning an IP address.
Another condition that allows authentication to the client devices before assigning an IP address is that client devices must have 802.1X authentication enabled. This is because 802.1X authentication is a mutual process that requires both the client devices and the FortiGate device to support and enable it. The client devices must have 802.1X authentication enabled in their network settings, which allows them to initiate the authentication process when they connect to the hardware switch interface of the FortiGate device. The client devices must also have an 802.1X supplicant software installed, which is a program that runs on the client devices and handles the communication with the FortiGate device using EAP messages. The client devices must also have a trusted certificate installed, which is used to verify the identity of the FortiGate device and establish a secure EAP channel. Therefore, client devices must have 802.1X authentication enabled before assigning an IP address. References: https://docs.fortinet.com/document/fortigate/7.0.0/administration-guide/19662/hardware- switch-interfaceshttps://docs.fortinet.com/document/fortigate/7.0.0/administration-guide/19662/802-1x- authentication
https://docs.fortinet.com/document/fortigate/7.2.0/new-features/959502/support-802-1x-on-virtual-switch-for- certain-np6-platforms

QUESTION 66
You want to use the MTA adapter feature on FortiSandbox in an HA-Cluster. Which statement about this solution is true?

The configuration of the MTA Adapter Local Interface is different than on port1.

The MTA adapter is only available in the primary node.

The MTA adapter mode is only detection mode.

The configuration is different than on a standalone device.

QUESTION 67
Refer to the exhibit.

A customer has deployed a FortiGate 300E with virtual domains (VDOMs) enabled in the multi-VDOM mode. There are three VDOMs: Root is for management and internet access, while VDOM 1 and VDOM 2 are used for segregating internal traffic. AccountVInk and SalesVInk are standard VDOM links in Ethernet mode.
Given the exhibit, which two statements below about VDOM behavior are correct? (Choose two.)

You can apply OSPF routing on the VDOM link in either PPP or Ethernet mode

Traffic on AccountVInk and SalesVInk will not be accelerated.

The VDOM links are in Ethernet mode because they have IP addressed assigned on both sides.

Root VDOM is an Admin type VDOM, while VDOM 1 and VDOM 2 are Traffic type VDOMs.

OSPF routing can be configured between VDOM 1 and Root VDOM without any configuration changes to AccountVInk

QUESTION 68
You are creating the CLI script to be used on a new SD-WAN deployment You will have branches with a different number of internet connections and want to be sure there is no need to change the Performance SLA configuration in case more connections are added to the branch.
The current configuration is:

Which configuration do you use for the Performance SLA members?

set members any

set members 0

current configuration already fulfills the requirement

set members all

Related posts:

admin

You might also like

Leave a Reply Cancel reply