[Nov 13, 2026] Powerful NCP-BC-7.5 PDF Dumps for NCP-BC-7.5 Questions [Q29-Q51]

Rate this post

[Nov 13, 2026] Powerful NCP-BC-7.5 PDF Dumps for NCP-BC-7.5 Questions

Authentic NCP-BC-7.5 Dumps – Free PDF Questions to Pass

Nutanix NCP-BC-7.5 Exam Syllabus Topics:

Section	Objectives
BCDR Fundamentals and Requirements Interpretation	– Selecting appropriate replication types (async, near-sync, synchronous, metro) – Translating business requirements into resilient recovery architectures – Defining recovery strategies aligned to business requirements and risk tolerance – Availability metrics and SLA definitions – Understanding RTO and RPO concepts and business impact analysis
Nutanix Disaster Recovery Solutions	– Configuring and managing replication policies – Failover procedures and execution – Integration with third-party backup solutions – Recovery workflows using Nutanix native tools – Metro Availability configuration and management
Data Protection and Snapshots	– Snapshot retention policies design – Data restoration at VM and application level – Storage configuration for BCDR – Snapshot scheduling and management – Incremental backup implementation
Security and Hardening	– Security best practices for replication – Approval policies configuration – Designing secure BCDR environments – RBAC implementation for disaster recovery
Monitoring, Testing and Troubleshooting	– Non-disruptive recovery testing – Setting up alerts for replication lag – Documenting runbooks for incident response – Resolving third-party backup integration problems – Diagnosing network, storage and replication failures – Troubleshooting permission issues and misconfigured DR environments
Replication and Failover Architecture	– Synchronous replication across sites – Recovery site capacity management – Network segmentation for BCDR environments – Asynchronous replication planning – Failover readiness validation

Q29. An organization uses Nutanix Disaster Recovery with automatic virtual network creation in the Nutanix Cloud AZ. After a successful failback operation from the Nutanix Cloud AZ to the on-premises site, what is the expected behavior regarding the dynamically created virtual networks at the recovery site?

Converted into production networks for use in the future

Automatically cleaned up when no longer required

Must be manually deleted by the administrator

Remain active until the billing cycle ends

Q30. An administrator is troubleshooting a hung replication. When checking the replication status, the complete percent and bytes completed do not increase. The administrator checks the Stargate logs on the destination cluster and confirms the writes are failing with ” nfs status 28 ” . Checking the container info on the destination cluster, free space on the container is 0. The administrator confirms that there is sufficient space available in the storage pool. What could be the reason for free space on the container to be 0?

Advertised capacity is set for the container.

Replication factor needs to be set to 1.

Thick Provisioning is consuming all available space.

Compression is turned off.

Q31. An administrator previously configured Synchronous Replication on a VM named MarketVM. Due to upcoming maintenance at the primary site, it was decided to use Cross Cluster Live Migration (CCLM) to move the VM to the secondary site. When running CCLM, the task failed. What is a possible reason for this CCLM failure?

MarketVM has a SCSI disk attached.

Secondary site does not have enough storage to handle the MarketVM.

The network doesn ‘ t have the bandwidth for Synchronous Replication.

MarketVM has memory overcommit configured.

Q32. An administrator is validating a newly created Recovery Plan and receives the following warning:
IP addresses xxx.xxx.xxx.xxx cannot be preserved/mapped for VM REPORTVM01.
IP addresses cannot be preserved/mapped for entities
IP might be already in use or will be used by some other VM for recovery. IP cannot be mapped.
Only one IP address can be preserved for a vNIC in an IP address management enabled network.
What can the administrator do to resolve this warning without changing the existing IP address assigned to the VM?

Disable IPAM on the recovery site subnet to allow Nutanix DR to preserve static IP addresses during failover.

Add an additional vNIC to the VM and assign the IP address to the new vNIC to bypass the IPAM conflict.

Configure Custom VM IP Mapping in the Recovery Plan to define explicit IP address mapping for the VM.

Remove and re-add the VM to the Recovery Plan to trigger a fresh IP address mapping validation.

Q33. An administrator at a retail company is preparing to apply a critical OS security patch to a production SQL Server VM. Before starting, the administrator ensures the VM is part of a Protection Domain and manually creates a local snapshot (Recovery Point). Ten minutes after the patch is applied, the SQL service fails to start, and the database logs indicate corruption in the system registry. The administrator needs to return the VM to its functional state from ten minutes ago as quickly as possible. The administrator decides to perform a Restore from the local snapshot. Under which condition would an In-place Restore (Revert) fail, forcing the administrator to use the Clone (Out-of-place) option instead?

NGT (Nutanix Guest Tools) version was updated immediately after the snapshot.

The VM is currently powered on and cannot be shut down.

The VM ‘ s memory was increased from 16GB to 32GB to accommodate the patch installation.

A new 50GB data disk was added to the VM configuration after the snapshot was taken.

Q34. Refer to Exhibit:

An administrator is configuring Metro Availability in their environment, as shown in the diagram. What issue in the configuration will prevent Metro from working correctly?

The Witness VM is located in a third site.

The latency between Site 1 and Site 2 is too high.

Each site should have a Witness VM.

The latency from the Witness VM to both Site 1 and 2 is too high.

Q35. Which file system is supported on Linux VMs for Self-Service Restore?

EXT4

NTFS

EXT

VFAT

Q36. Which statement describes the automatic detachment timeout period for a snapshot disk mounted to a VM using the Nutanix Guest Tools (NGT) Self-Service Restore (SSR) feature?

The snapshot disk will remain attached in read-only mode until the VM is rebooted.

The disk will be automatically detached during the next scheduled Stargate background scan or Curator full scan (typically within 6 hours).

The system enforces a built-in timeout; if the user does not manually detach the disk from the VM, it is detached automatically by the system after 24 hours.

The disk remains permanently attached to the VM until an administrator manually detaches it via Prism.

Q37. When designing a Disaster Recovery strategy to an NC2 cluster using MST, which technical limitation impacts the Recovery Plan and workload compatibility?

The ” Zero Compute ” configuration requires manual restoration of workloads (automated failover is not supported), and MST currently only protects AHV VMs.

To ensure resilience on NC2, both MST DR and ” Cluster Protect ” features must be configured simultaneously on the same cluster.

Automated failover is natively supported in the ” Zero Compute ” configuration but strictly requires configuring an external IPAM to manage and reassign IP addresses.

The ” Pilot Light ” configuration allows to select multiple on-premise clusters as sources within a single protection policy to automate the failover of AHV and ESXi VMs.

Q38. An administrator needs to perform a test failover on a Recovery Plan. What is the primary goal of this action?

Copy data from primary to recovery location before failover happens.

Perform a live production cutover and permanently switch all workloads to the recovery site.

Validate recoverability and network mappings without impacting production systems.

Disable replication before a planned maintenance window.

Q39. Which log file should an administrator review to ensure consistent connectivity stability between primary and remote disaster recovery sites?

cerebro.INFO

mantle.out

prism_monitor.INFO

genesis.out

Q40. An administrator incorrectly used the ” Activate ” functionality on the PD to test failover of VMs from production to DR cluster. The VMs were successfully restored on the DR side. What steps are needed to clean up the VMs on the DR side and resume normal operations on the Production cluster?

Use the Activate functionality on the production cluster.

Deactivate PD and destroy VMs on the production cluster.

Manually delete the VMs on the DR cluster.

Deactivate PD and destroy VMs on the DR cluster.

Q41. How does the system behave if the network cannot sustain the data change rate required to maintain a 1- minute RPO between the primary and recovery AZs?

The VMs continue to be protected in 1-minute RPO, but write I/O is degraded.

The system automatically switches to Asynchronous replication mode.

The protected VMs are failed over.

All write I/O to the protected VMs is paused.

Q42. After performing a failover of encrypted AHV VMs from an on-premises AZ to a recovery AZ, an administrator notices that newly written data is not encrypted. Which post-failover cleanup task must be performed to correct this issue?

Enable replication traffic encryption.

Reassign storage policies and categories.

Reconfigure the replication schedule.

Recreate the recovery plan and categories.

Q43. What is the bandwidth limit of a single Nutanix Cloud Gateway for IPSec traffic?

250 Mbps

500 Mbps

1 Gbps

10 Gbps

Q44. An administrator notices that the link between the source and destination clusters gets overutilized during recovery point replication. The company secured a new 10G connection between the two clusters.
What configuration should the administrator use so that the replication traffic uses the new 10G link?

Configure Flow Rules.

Configure Network Segmentation for DR.

Configure Network Segmentation for Volumes.

Configure Backplane Network.

Q45. Recently, several new VMs were deployed as part of an application expansion. Within 24 hours, the administrator notices no recovery points are being created for the new VMs.
During investigation, the administrator observes:
* Existing VMs in the Protection Policy continue to replicate successfully.
* No replication task failures are reported.
* Network connectivity between clusters is healthy.
* Storage capacity at the remote site is sufficient.
* The Protection Policy uses category-based entity selection.
* The newly deployed VMs were provisioned by a separate team.
What is the most likely root cause of the issue?

The new VMs were not added to the required category.

The replication schedule must be changed to Nearsync.

Snapshot retention settings are too low.

The recovery plan must be recreated.

Q46. An administrator builds a single recovery plan that includes workloads protected with Asynchronous (async) and Nearsync replication schedules together with workloads protected by Synchronous replication (syncrep) schedules. Which statement is true regarding this configuration?

Mixing schedule types in the recovery plan only affects retention, not recovery success.

Mixing async and nearsync in the same recovery plan is supported.

Mixing is supported only for test failovers, but not for planned or unplanned failovers.

Mixing async and syncrep schedules in one recovery plan is supported.

Q47. An administrator is preparing to configure DR between an on-prem AZ and Nutanix Cloud AZ. Replication fails immediately after configuration. Which prerequisite should be verified?

The clusters are running identical hypervisors.

Both clusters have external IP addresses.

Deduplication is disabled.

Synchronous replication is configured.

Q48. Exhibit:

An administrator wants to protect the snapshots created on the cluster. Only authorized users should be allowed to modify or delete the snapshots on the cluster. How can the administrator harden the security of the snapshots?

Configure CVM and AHV hardening.

Configure a backup user with admin privileges.

Configure cluster lockdown and use SSH keys.

Configure Approval policy for snapshots.

Q49. How does Nutanix Disaster Recovery automatically handle Container Mapping if a storage container with the same name does not exist at the recovery Nutanix cluster?

The data is temporarily kept in the SSD tier of the remote site pending intervention.

The system automatically creates a new Storage Container with the same name on the remote site.

The initial replication fails and generates a critical alert requiring manual mapping in Prism Central.

The recovery points replicate to a random storage container at the recovery Nutanix cluster.

Q50. Which native Nutanix tool is used to determine connectivity between two sites during disaster recovery testing?

acli
/B. ccli

ncc

ecli

Q51. An administrator is concerned about the operational overhead of manually creating and managing categories across both the primary and recovery sites to ensure Recovery Plans function correctly during failover and failback. What Nutanix Disaster Recovery behavior minimizes this concern?

Categories only need to be configured at the recovery site since that is where failover operations are executed.

Categories must be manually replicated using the Prism Central API between sites to ensure consistency.

Recovery Plans replicate categories only during an active failover event to minimize replication traffic.

Categories are automatically synchronized to the recovery site AZ when they are specified in a Recovery Plan.