Buy Latest Dec 05, 2022 C-IBP-2111 Exam Q&A PDF - One Year Free Update [Q37-Q59]

Rate this post

Buy Latest Dec 05, 2022 C-IBP-2111 Exam Q&A PDF – One Year Free Update

Download the Latest C-IBP-2111 Dump – 2022 C-IBP-2111 Exam Questions

SAP C-IBP-2111 Exam Syllabus Topics:

Topic	Details
Topic 1	Display, create, copy, edit, check, and activate a planning area General Configuration of a Planning Area
Topic 2	Create statistical forecast using historical data with basic methods Use the Fiori Launchpad to customize the UI, work with Excel UI
Topic 3	Planning Operators & Application Jobs Use Planning Operators
Topic 4	Optimize inventory in the supply chain utilizing algorithms that derive inventory targets

NO.37 You are modeling the introduction of a new product using Lifecycle Planning functionality in SAP IBP.
What is mandatory to create in your planning area for the setup of reference product(s) to work? Note:
There are 2 correct Answers to this question.

Planning objects for the new product

Definition of an attribute representing the product ID

Definition of Actual Sales business meaning for one key figure

Definition of an attribute representing the product description

NO.38 You are modeling a substitution scenario associated with a promotion. What are some of the Master Data parameters that you need to maintain to ensure desired results generated by the optimizer? Note:
There are 2 correct Answers to this question.

Flag ‘Disable Substitution of Location Products’

Loc-Prod Subst Valid-From Date

Promotion duration

Location Product Sub Cost Rate

NO.39 When you promote calculated and approved inventory parameters from SAP IBP for inventory, what other IBP modules can be receiving them? Note: There are 2 correct Answers to this question.

SAP IBP for sales and operations

SAP IBP for response and supply

SAP IBP for demand

DDMRP

NO.40 You need to create time periods for the time profile in a planning area. What should you be aware of when executing the Create Time Periods application job?

This application job cannot be scheduled for immediate start.

A time profile has to be activated so that the application job can proceed.

This application job can be run for multiple time profiles at once.

The planning area with this time profile must be activated so that the application job can proceed.

NO.41 What setting is mandatory in the Manage Lifecycle Planning app when introducing a new product?

Define which phase-in and phase-out profiles can be used within Lifecycle Planning

Define which key figure can be used as sales history for new products

Define at least one attribute of the planning area which represents the Product ID

Define which is the attribute ID for the Lifecycle profiles

NO.42 Which calculations can be processed within the pre-processing step in the forecasting model? Note:
There are 2 correct Answers to this question.

Rounding can be executed for the sales history.

Missing Values can be substituted.

Promotion Sales Lift Ups can be deleted.

Correlations can be evaluated.

NO.43 You are adding a value-based filter to a planning view. Which of the following conditions apply? Note: There are 3 correct Answers to this question.

The alerts dashboard is not available if a value-based filter is set for the open planning view.

These filters are always applied based on the values stored in the database.

You can only apply one value-based filter per planning view.

These filters can be used together with attribute totals in the same planning view.

You can add (or delete) planning objects to a planning view after these filters are applied.

NO.44 What actions can be performed in the Advanced Dashboards application? Note: There are 3 correct Answers to this question.

Rename the charts.

Add process templates.

Organize charts.

Display all assigned analytics on a single UI.

Link two analytics charts.

NO.45 What are the ways to achieve rolling aggregation with SAP IBP?

Using attribute as a key figure

Using key figure calculation

Using local member

Using aggregation mode average

NO.46 You have set up a planning area and data is available. You adjust the necessary time profile settings and run the consistency check. Which settings can you change and still run a successful consistency check?
Note: There are 2 correct Answers to this question.

Change the past and future horizon of the levels in the time profile.

Remove an attribute assigned to the time profile level if the attribute is used in a planning level.

Add a new time profile level to the time profile.

Change the description of the attributes in the time profile.

NO.47 What options for copying will be available to you? Note: There are 2 correct Answers to this question.

Creation of a partial copy with a new ID along with the time profile and required master data types

Creation of a partial copy with a new ID along with the time profile and all master data objects

Creation of an exact copy with a new ID, with the time profile and master data types shared with the source

Creation of an exact copy with a new ID along with the time profile and master data types

NO.48 While modeling for a large machine with high capital needs, you need it to run cost effectively with minimum utilization, even if it means producing more than demand. Which solution would apply to this scenario? Note: There are 2 correct Answers to this question.

Capacity leveling will be possible for production and storage resources.

Excess stock can be generated and will need to be staged in an overflow warehouse.

Enough demands can be pulled forward and pull production will occur.

Balance can be achieved between excessive prebuild and minimum utilization by incorporating violation costs.

NO.49 You are invited to review a problem with a customer’s SAP IBP Excel template performance. What areas with the biggest potential performance impact would you focus on? Note: There are 2 correct Answers to this question.

Number of local members and complexity of calculations

Complex calculation graphs for key figures

Excessive IBP formatting in Excel UI

Number of analytics charts displaying key figures’ values

NO.50 A time profile is defined with the levels of day, technical week, week, month, quarter, and year. What condition in configuration will allow you to have a different value in the current week, versus all other buckets?

IF(“PERIODID2” =”$$PERIODID2CU$$…)

IF(“PERIODID5” =”$$PERIODID5CU$$…)

IF(“PERIODID4” = “SSPERIODID4CU$$…)

IF(“PERIODID3” =”$$PERIODID3CUSS…)

NO.51 You are modeling a substitution scenario associated with a promotion. What are some of the Master Data parameters that you need to maintain to ensure desired results generated by the optimizer? Note: There are 2 correct Answers to this question.

Flag ‘Disable Substitution of Location Products

Loc-Prod Subst Valid-From Date

Promotion duration

Location Product Sub Cost Rate

NO.52 SAP is transitioning IBP customers to the new process of export/import. What are some of the features of this new process? Note: There are 2 correct Answers to this question.

You can choose to import only some of the items that were exported.

You can move a transported item from one collection to another.

You can create a collection of items and export it.

You can export from a planning area that is on a different release.

NO.53 Which header name displays are available in the Report Options menu of the SAP IBP Excel interface?Note:
There are 2 correct Answers to this question.

Changed member names that the user had created

Caption, as defined in configuration for the default name

Business meaning, as defined in configuration

Full unique name including the dimension and technical name

NO.54 Which of the following configuration options are part of the new key figure creation process? Note:
There are 3 correct Answers to this question.

Hiding or displaying totals for the key figure

Enabling planning notes for the key figure

Setting permitted planning levels

Setting disaggregation logic for the key figure

Enabling fixing for the key figure

NO.55 Which of the following settings can you use in your supply planning background job triggered from Excel? Note: There are 2 correct Answers to this question.

Planning unit

UOM to ID

Target currency

Type of algorithm to use

NO.56 What type of key figure requires a planning level to have all attributes as roots?

The conversion key figure, such as exchange rate

The special key figure marked as an aggregate key figure

The time independent key figure, such as FCSTMAPE

The attribute transformation key figure, such as PERIODID1

NO.57 You create a planning filter using an SAP IBP Fiori app. Which of the following objects can it be applied to?
Note: There are 2 correct Answers to this question.

Planning view templates in the SAP IBP add-in for Microsoft Excel

Supply chain graph in Supply Chain Network app

Snapshot operator in the SAP IBP add-in for Microsoft Excel

Jobs in the Applications Jobs app

NO.58 You created a key figure and want to add calculations. Which of the following rules do you consider?
Note: There are 2 correct Answers to this question.

All key figure calculations have calculation inputs, which can be marked as stored or calculated.

The calculation chain for a key figure must always result in a calculated key figure.

Aggregation calculations using SUM or MAX functions must be based on a higher aggregation level.

Key figures can be calculated across different planning levels.

NO.59 You want to display and edit data in different units of measure (UOM). Which of the following must you consider before you use UOM? Note: There are 3 correct Answers to this question.

Analytics provide the user with the option to select the target unit of measure.

Unit of measure is an attribute of a master data type, such as Product.

Units of measure are usually not time-dependent.

Units of measure are usually not time-independent.

Conversion to the target unit of measure is handled by functionality of SAP IBP Excel UI

Verified C-IBP-2111 Dumps Q&As – 1 Year Free & Quickly Updates: https://www.prepawaypdf.com/SAP/C-IBP-2111-practice-exam-dumps.html

Buy Latest Dec 05, 2022 C-IBP-2111 Exam Q&A PDF – One Year Free Update [Q37-Q59]

SAP C-IBP-2111 Exam Syllabus Topics:

admin

Leave a Reply Cancel reply

SAP C-IBP-2111 Exam Syllabus Topics:

Related posts:

admin

You might also like

Leave a Reply Cancel reply