Oracle 1Z0-1045-21 Exam Dumps – PDF Questions and Testing Engine [Q18-Q42]

Rate this post

Oracle 1Z0-1045-21 Exam Dumps – PDF Questions and Testing Engine

Latest 1Z0-1045-21 Exam Dumps for Pass Guaranteed

NO.18 Which two configurations are necessary to use a pick-to-cart functionality? (Choose two.)

Configure label types for cart capacity

Configure the Print Task setting

Define the OBLPN Types

Define the Cubing Rule

Add the Pick Cart UI to the Receiving personnel’s menu

NO.19 You are theinventory control superuser of a warehouse and need to audit all the cycle count activities done by the operators before they are communicated to the host system from WMS Cloud.
You are responsible for the cycle count functionality configuration of the warehouse as well. This warehouse was newly bought by your company.
Your company is a 3PL and this new warehouse will be used for a new client of your company. Which four tasks do you need to complete? (Choose four.)

Create a Cycle Count RF screen with theparameterauto-approve-modeset to off.

Audit the Pending records in the Cycle Count Adjustment screen.

Create a Cycle Count RF screen with the parameterauto-approve-modeset to on.

Set the company parameterINVN_ADJ_APPROVAL_REQUIREDto yes foryour company.

Set the company parameterINVN_ADJ_APPROVAL_REQUIREDto yes for the company that you are configuring.

Set the facility parameterINVN_ADJ_APPROVAL_REQUIREDto yes for the new warehouse.

NO.20 Your customer wants to Putaway LPN to Location by using the Putaway Rules and link the location with the Replenishment Zone.
Which four configurations are required? (Choose four.)

Putaway Priority and Rules are setat Facility Level.

Set Replenishment Zone for Active Location.

Set the Location Size Type at Facility Level.

Putaway Type is set at Facility Level.

Set Replenishment Zone for Reserve Location.

Set Criteria for Putaway Rules.

NO.21 Identify the type offunctions you need to use to handle conditional information in a report.

Arithmetic and Geometric Functions

WMS BI Cloud does not support that type of functionality

String Functions

Dynamic Functions

Logical Functions

NO.22 While working on the configuration of your client, you uncover that the ASNs will always have the correct serial number information interfaced upfront and your client trusts the ASN information. Your client also needs the serial number information to get into WMS Cloud when the items are received from POs.
Which three actions do you need to take, assuming that item A is serial-tracked? (Choose three.)

Set item A’s require serial number parameter to “Required, validate and allow user override”.

Create the IB Container barcode type.

Create the Serial Number barcodetype.

Set the company parameter SERIAL_NUMBER_TRACKING_LEVEL TO 2.

Set item A’s require serial number parameter to “Required, don’t Validate”.

NO.23 You are monitoring the progress of the picking wave and notice that a rushorder needs to be picked immediately.
Which two steps should you take to complete the Picking Tasks as soon as possible? (Choose two.)

Select the tasks in the Tasks UI, and confirm the pick in the UI.

Select the tasks in the Tasks UI, select Cancel Task, and re-run the wave.

Manually take the inventory from the location to the shipping area.

Select the tasks and in the Tasks UI, select Change Task Priority to give the task a higher priority.

Select the tasks in the Tasks UI, select Assignuser, and let the picker know that he/she is to select the tasks for immediate pick.

NO.24 What is true about emailing a scheduled report?

You cannot customize the subject of the email

You can email reports in HTML format

The person receiving the email must have an email registered with a username in the system

You can add an additional filter for a specific scheduled report

NO.25 A warehouse manager needs to view additional information not available in the existing Picking applications.
Identify two ways to fulfill thisrequirement. (Choose two.)

Create a custom WMS BI Cloud showing the information.

Access data through SQL.

Modify the base application to display additional information.

Use a base WMS BI Cloud showing the needed information.

NO.26 Identify two correct statements about ASN creation. (Choose two.)

The ASN number canbe system generated or manually entered.

Oracle WMS Cloud allows creation of a single/multiple ASN from a PO.

Oracle WMS Cloud only allows creation of a single ASN from a PO.

The ASN number is always auto-generated from a sequence number.

NO.27 Which three configurations are required to sort the SKU A and B while receiving? (Choose three.)

An IB Shipment Type should be created to receive Purchase Order with sort SKUs.

Use Custom Field in Vendor UI to map the item that needs to be sorted.

BreakRule with Criteria needs to be set for the Sorting Rule.

Receive Station Location for Sorting should be created and mapped with the Sorting Rule.

Putaway Type should be configured for the SKU.

The Locations Size type should be defined for eachReceive Station Location.

NO.28 Consider that in your company you are handling lot number tracking of items.
Which two statements are true regarding lot management? (Choose two.)

Once can allocate the Inventory against the lot number during waving against an Outbound Order.

After performing the Putaway of an IB LPN, which is having the lot number, the lotnumber will not be transferred to the Active location.

A received IBLPN can have multiple lot number-tracked SKUs with different lot number inventory at any point of time.

A batch number in the Batch Management UI has to be always linked to an expirydate.

NO.29 Which two REST API actions are supported by Oracle WMS Cloud? (Choose two.)

SEND

RECEIVE

DELETE

GET

POST

NO.30 Your company is looking for a simplified method for managing a group ofreports. Identify the type of report used in WMS Cloud that compiles multiple existing reports into a single document while executing each report in a single order.

CrossTab Report

Express Report

Linked Report

Chained Report

Standard Report

NO.31 What is the primary purpose of the Wave Template Search Screen?

to determine how many picking tasks will be waved for picking

to determine the locked locations for inventory allocation

to identify all outbound loads that have not completedpicking yet

to determine which available orders will be waved for picking

to determine from which part of the warehouse theinventory will be allocated

NO.32 A Purchase order created in ERP is downloaded to WMS Cloud.
Which two statementsare correct related to the Purchase order update? (Choose two.)

Purchase order can be re-created by sending the RE-CREATE action code when the status is In- Receiving.

UPDATE is sent in the Header and CREATE in the Detail for an existing Purchase Order line. The application will add up the corresponding “Order Quantity”.

The RE-CREATE action code if sent for an existing PO, the same PO will be deleted and re-created with the new details.

UPDATE is sent both in the Header and Detail for an existing line. The application will just update the record at Details.

The Purchase order header canbe updated by sending an UPDATE action code when the status is in Created and Received.

NO.33 Identify two correct statements about the type of receiving supported by Oracle WMS Cloud. (Choose two.)

Oracle WMS Cloud does not allow assigning multiple ASNs to a load.

Receive by ASN (RF-Text: Recv LPN Shipment) allows receiving multiple ASNs.

If the trailer contains multiple ASNs, IB Loads can be used to consolidate then into a single record.

Receive by load (RF-Text: Recv LPN Load)allows receiving multiple ASNs.

NO.34 The above diagram shows a typical Third Party Logistics (3PL) structure.
Identify the Facility, Company, and User levels, as applicable, in sequential order (that is, the proper label for box 1 is listed 1stin sequence).

1=Facility 1, 2=Company 1, 3=Company 2, 4=Super User 1, 5=Facility 2, 6=Facility 3, 7=Facility 4

1=Parent 3PL, 2=Facility 1,3=Facility 2, 4=Company 1, 5=Company 2, 6=Company 3, 7=Company 1

1=Company 1, 2=Parent 3PL, 3=Company 2, 4=Facility 1, 5=Facility 2, 6=Facility 3,7=Facility 4

1=Super User, 2=Parent 3PL, 3=Company 1, 4=Facility 1, 5-Facility 2, 6=Facility 3, 7=Facility 4

NO.35 Your customer wants to store the inventory to Active and Reserve locations after receiving. Inventory is received in cases pack quantity and assigned to an IBLPN. Inventory is categorized to Bin Shelves and Bulk flow items and the items dimensions are available in WMS Cloud.
Which three putaway configurations are required to meet this? (Choose three.)

Locations Size type and Item Putaway item should be configured prior to Putaway

Putaway rule overrides Putaway priority and selects the location based on the item dimension

Putaway rule will act according to the Priority defined.

This is not supported in WMS Cloud.

Selection Criteria will evaluate and apply the Putaway priority.

Putaway priority will drive the location selection.

NO.36 Why is it necessary to have a consolidation location?

Consolidation locations are used to consolidate orders for a wave.

Packing using a Distribution transaction requires a consolidation location for each store.

It is necessary if you want to consolidate while packing.

After you arefinished picking your pick cart, you use a consolidation location to pack.

NO.37 Your warehouse isdivided into two large areas, Area A and Area B, which store different products. You have set up your wave to allocate inventory from only Area A, but when the wave is run, both Area A and area B have allocated items.
What caused the issue?

In the Allocation Mode, “Restrict Allocation Zone” was not specified.

In the Allocation Mode, “Restrict Allocation Zone” was set to Area B.

Allocation zone was not specified in the task selection criteria.

Allocation zone was not specified in the shipping order.

The locations in Area A have excessive cycle count tasks against them.

NO.38 Your company wants to use Replenishment Wave to maintain adequate inventory levels to meet customer demand by fulfilling customer’s orders on time.
Which Replenishment Trigger Mode needs to be set up in the Replenishment Template for the following condition?
* For active Location P20A100
* Minimum Volume = 20
* Max Volume = 100
* Percentage of Max = 20%
* Length = 20, Width = 40, Height = 60
* If location P20A100 total volume goes below 20, the location is triggered forreplenishment

Minimum Capacity

Reactive

Order Based

Percentage of Max

NO.39 Your company’s count process has two levels:
* First, at the end of each quarter, the operators will need to get a list of all the LPN numbers in every location via cycle count.
* Second, at the end of each month, the operators will do a spot check for any 100 LPNs and count their content information, and to save time, they will scan each item only once and enter the total quantity of the item marked on the inner package inside an LPN.
Your company has reserve locations only for storage and you’re doing the WMS Cloud configuration for the operators. Which two tasks should you complete? (Choose two.)

Create a Cycle Cnt RF screen for the operators to use, andleave thecontent-count RFparameter blank.

Create a Resv Nbr Cnt RF screen for the operators to use.

Enable the Recount Location Detail cc_trigger.

Create a Cycle Cnt RF screen for the operators to use, and set the content-count RF parameter to By Sku Qty.

Create a Cycle count for LPN deferred/immediate updates RF screen for the operators to use, and set the sku-scan-mode RF parameter to By Qty Scan.

NO.40 Select three statements are true.(Choose three.)

Appointments can be used (instead of IB loads) as a way of checking in Loads into the WMS Cloud for receiving.

The Duration as specified cannot be exceeded by the users.

Appointments cannot be used to track lead-time from the trailer’s check-in time to the receipt of the first LPN into the system.

The matching value type and matching value must be specified when the appointment is created.

Appointments are useful for tracking time discrepancies in various metrics such as planned and actual arrival time.

NO.41 When creating an Appointment, which three “Matching value type” selections can be used to create the Appointment? (Choose three.)

License Plane Nbr

Load Nbr

Dock Door

PO Number

AdvanceShipment Notification

Trailer Nbr

NO.42 In which two ways can you execute the detail cycle count of LPN Detail by sku scan? (Choose two.)

using “Cycle Cnt” screen with screen parametercontent-countset to “sku-scan”

using “Cycle count for LPN deffered/immediate updates” with screen parametersku scan modeset to
“By Sku Scan”

using “Resv Nbr Cnt” screen and with screen parametercontent-countset to “sku-scan”

using “Cycle Cnt”screen with screen parameter content-count set to “Null”

Reliable Oracle Warehouse Management Cloud 1Z0-1045-21 Dumps PDF Apr 08, 2022 Recently Updated Questions: https://www.prepawaypdf.com/Oracle/1Z0-1045-21-practice-exam-dumps.html

Oracle 1Z0-1045-21 Exam Dumps – PDF Questions and Testing Engine [Q18-Q42]

admin

Leave a Reply Cancel reply

Related posts:

admin

You might also like

Leave a Reply Cancel reply