NSE6_WCS-7.0 PDF Exam Material 2025 Realistic NSE6_WCS-7.0 Dumps Questions [Q15-Q38]

Rate this post

NSE6_WCS-7.0 PDF Exam Material 2025 Realistic NSE6_WCS-7.0 Dumps Questions

Updated Fortinet NSE6_WCS-7.0 Dumps – PDF & Online Engine

Q15. What is a drawback of deploying a FortiWeb VM inside a virtual public cloud (VPC) compared to FortiWeb Cloud?

It is unable to support web applications from OWASP Top 10 threats.

It does not support zero-day protection.

It is slower than FortiWeb Cloud to apply advanced WAF protection.

Only applications going through the VPC are protected.

Q16. An MSSP deployed 16 FortiGate VMS With the default AWS security groups and network access lists using an on-demand license from Amazon Web Services (AWS) Marketplace. They are using a third- party configuration backup application to back up and track changes for the FortiGate configurations. It can connect to the FortiGatedevices using only the SSH protocol, A customer is using the correct username and password configured on the FortiGate devices. but they are unable to log in using the SSH protocol.
What can be the reason Why this authentication is failing?

The default AWS network access list for FortiGate does not allow SSH.

The AWS key is required to log in to FortiGate using SSH

AWS uses non-standard SSH port1025, and the default AWS security groups and NACL for FortiGate are not configured for the port.

The default AWS Security group for FortiGate does not allow SSH.

Q17. Which three Fortinet products are available in Amazon Web Services in both on-demand and bring your own license (BYOL) formats? (Choose three.)

FortiGate

FortiWeb

FortiADC

FortiSlEM

FortiSOAR

Q18. Which product you Can use as AWS WAF web access control lists (web ACLS) to minimize the effects Of a DDOS attack?

AWS Protector

AWS GuardDuty

AWS Inspector

AWS Shield

Q19. Refer to the exhibit.

A customer is using the AWS Elastic Load Balancer (ELB).
Which two statements are correct about the ELB configuration? (Choose two.)

The load balancer is configured to load balance traffic among multiple availability zones.

The Amazon Resource Name is used to access the load balancer node and targets.

You can use the DNS name to reach the targets behind the ELB.

The load balancer is configured for the internal traffic of the virtual public cloud (VPC).

Q20. Which two statements are correct about AWS Network Access Control Lists (NACLS)? (Choose two.)

NACLs are stateless: responses to allowed inbound traffic are subject to the rules for outbound traffic.

An NACL has separate inbound and outbound rules, and each rule can either allow or deny traffic.

By default. each custom NACL allows all inbound and outbound traffic unless you add new rules,

VPC automatically comes with a modifiable default NACL, and by default it denies all inbound and outbound IPv4 traffic.

Q21. A global organization with cloud networks deployed in several AWS regions wants to set up next-generation firewall (NGFW) protection using FortiGate Cloud-Native Firewall (CNF).
What are two deployment considerations for the organization? (Choose two.)

Only one CNF instance is required to protect all AWS regions.

More than one AWS account can be associated with a CNF instance.

They must choose AWS Firewall Manager to provision a CNF instance.

A CNF instance is required for each AWS region that must be protected.

Q22. An administrator is adding a web application to be protected by FortiWeb Cloud.
Which two steps are necessary to successfully onboard the application? (Choose two.) An administrator is adding a web application to be protected by FortiWeb Cloud.
Which two steps are necessary to successfully onboard the application? (Choose two.)

Wait for the EC2 instance to be created.

Provide a web application name.

Create DNS records in the domain server that hosts the application.

Enable a content delivery network (CDN) in the same region where your application is located.

Q23. Which three statements are correct about AWS security groups? (Choose three)

a Security group rules are always permissive: you cannot create rules that deny access.

By default, security groups block all outbound traffic.

When associate multiple security groups With an instance, the rules from each security group are effectively aggregated to create one set Of rules

Security groups are statetul

By default,security groups allow all inbound traffic.

Q24. AWS native network services offer vast functionality and inter-connectivity between the cloud and on- premises networks.
Which three additional functions can FortiGate for AWS offer to complement the native services offered by AWS? (Choose three.)

Higher VPN throughput

Web filtering

OSPF over IPSec

Advanced dynamic routing

Secure SD-WAN with application visibility

Q25. Refer to the exhibit.

You deployed an active-passive FortiGate HA using a Cloud Formation template on an existing VPC_Now you want to test active-passive FortiGate HA failover by running a debug so you can see the API calls to change the elastic and secondary IP addresses.
Which statement is correct about the output of the debug?

The routing table for Fgt2 updated successfully. and port2 will provide internet access to Fgt2.

The elastic IP is associated with port1of Fgt2.

IP address 10. O. O. L 3 is now associated with eni-Ob61d8afcOaefb8a2.

The elastic IP is associated with port2 of Fgt2. and the secondary IP address for port1and port2 was updated successfully.

Q26. An administrator must deploy a web application firewall (WAF) solution to protect the web applications of their organization.
Why would the administrator choose FortiWeb Cloud over AWS WAF with Fortinet managed rules?

WAF signatures must be manually updated by FortiGuard.

The solution must meet PCI 6.6 compliance.

SSL inspection is a requirement.

Traffic must be inspected for malware.

Q27. Refer to the exhibit.

You have created an autoscale configuration using a FortiGate HA Cloud Formation template. You want to examine the autoscale FortiOS configuration to confirm that FortiGate autoscale is configured to synchronize primary and secondary devices. On one of the FortiGate devices, you execute the command shown in the exhibit.
Which statement is correct about the output of the command?

The device is the primary in the HA configuration. with the IP address 10.0.0.173.

The device is the secondary in the HA configuration, and the IP address Of the primary device is
10.0.0.173.

The device is the primary in the HA configuration and the IP address of the secondary device is10.0.0.173.

The device is the secondary in the HA configuration. with the IP address 10.0.0.173.

Q28. Which three statements are correct about VPC flow logs? (Choose three.)

Flow logs do not capture traffic to and from 169.254.169.254 for instance metadata.

Flow logs do not capture DHCP traffic.

Flow logs can capture traffic to the reserved IP address for the default VPC router.

Flow logs can be used as a security tool to monitor the traffic that is reaching the instance.

Flow logs can capture real-time log streams for the network interfaces.

Q29. Refer to the exhibit.

Which statement is correct about the VPC peering connections shown in the exhibit?

To route packets directly from VPC B to VPC C through VPC A, you must add a route for network
192.168.0.0/16 in the VPC A routing table.

You cannot route packets directly from VPC B to VPC C through VPC A.

You can associate VPC ID pcx-23232323 with VPC B to form a VPC peering connection between VPC B and VPC C.

You cannot create a separate VPC peering connection between VPC B and VPC C to route packets directly.

Q30. Which three statements are correct about VPC flow logs? (Choose three.)

Flow logs do not capture traffic to and from 169.254.169.254 for instance metadata.

Flow logs can capture traffic to the reserved IP address for the default VPC router.

Flow logs do not capture DHCP traffic.

Flow logs can capture real-time log streams for the network interfaces.

Flow logs can be used as a security tool to monitor the traffic that is reaching the instance.

Q31. Refer to the exhibit.

Which two statements are correct about traffic flow in FortiWeb Cloud? (Choose two.)

The DNS name for the application servers must point to FortiWeb Cloud.

FortiWeb Cloud filters the incoming traffic from users, blocking the OWASP Top 10 attacks, zero-day threats, and other application layer attacks.

FortiWeb Cloud can protect the application servers only if they are all located in the same virtual public cloud (VPC).

Step 2 requires an AWS S3 bucket to be created.

Q32. Refer to the exhibit.

An administrator configured a FortiGate device to connect to the AWS API to retrieve resource values from the AWS console to create dynamic objects for the FortiGate policies. The administrator is unable to retrieve AWS dynamic objects on FortiGate.
Which two reasons can explain why? (Choose two.)

The AWS API call is not supported on XML version 1.0.

AWS was not able to validate credentials provided by the AWS Lab SDN connector because of a clock skew between FortiGate and AWS.

The AWS Lab SDN connector is configured with an invalid AWS access or secret key.

The AWS Lab SDN connector failed to connect on port 401.

The AWS Lab SDN did not find any instances in the configured VPC.

Q33. A customer deployed an HA Cloud formation to Stage and bootstrap the FortiGate configuration.
Which AWS functions are used by FortiGate HA to call the HA failover?

AWS Lambda functions

AWS Mapping functions

AWS S3 functions

AWS DynamoDB functions

Q34. An organization has created a VPC and deployed a FortiGate-VM (VM04 /c4.xlarge) in AWS, FortiGate-VM is initially configured With two Elastic Network Interfaces (ENIs). The primary ENI of FortiGate-VM is configured for a public subnet. and the second ENI is configured for a private subnet. In order to provide internet access. they now want to add an EIP to the primary ENI of FortiGate, but the EIP assignment is failing.
Which action would allow the EIP assignment to be successful?

Shut down the FortiGate VM. if it is running. assign the EIP to the primary ENI. and then power it on.

Create and associate a public subnet With the primary ENI Of FortiGate, and then assign the EIP to the primary ENI.

Create and attach a public routing table to the public subnet, associate the public subnet With the primary ENI Of FortiGate. and then assign the EP to the primary ENI.

Create and attach an Internet gateway to the VPC. and then assign the EIP to the primary ENI Of FortiGate.

Q35. You connected to the AWS Management Console at 10:00 AM and verified that there are two FortiGate VMS running, You receive a call from a user reporting about a temporary slow Internet connection that lasted only a few minutes. When you go back to the AWS portal. you notice there are now two additional FortiGate VMS that you did not create. Later that day, the number of VMS returns to two without your intervention. A similar situation occurs several times during the week.
What is the most likely reason for this to happen?

The VMS are in an availability group with dynamic membership.

Autoscaling is configured to act as described in the scenario.

The user ran a script to create the extra VMS to get faster connectivity.

The AWS portal is not refreshed automatically. and another administrator is creating and removing the VMS as needed.

Q36. An AWS administrator is designing internet connectivity for an organization’s virtual public cloud (VPC).
The organization has web servers with private addresses that must be reachable from the internet. The web servers must be highly available.
Which two configurations can you use to ensure the web servers are highly available and reachable from the internet? (Choose two.)

Deploy a network load balancer.

Configure a network address translation (NAT) Gateway in your VPC. Place web servers behind the NAT Gateway.

Add a route to the default virtual public cloud (VPC) route table forwarding all traffic to the internet gateway.

Deploy web servers in multiple availability zones.

Q37. An organization has the requirement to connect a data VPC to the on-premises infrastructure of a branch office in a hybrid cloud environment. The connectivity needs the higher bandwidth but the organization does not want to use multiple connections between sites.
Which AWS solution meets the requirement?

Transit VPC with IPSec

Internet Gateway

Transit Gateway multicast

Transit Gateway Connect

Q38. Refer to the exhibit.

An organization deployed the application servers in the AWS VPC that connects to the corporate data center using Transit Gateway Connect. Demand for the applications has grown and the connection requires more bandwidth.
What is required to achieve higher bandwidth?

Use routable public IP addresses instead of private IP addresses for connectivity.

You cannot increase bandwidth the connection has a fixed limit.

No configuration change is required because GRE tunnels are scaled to provide higher bandwidth.

You add a Transit VPC between the organization’s VPCs.

Fortinet NSE6_WCS-7.0 certification exam is an important step for individuals who wish to validate their knowledge and skills in cloud security on AWS. Successfully passing NSE6_WCS-7.0 exam can open up many career opportunities in this field, and can demonstrate a commitment to ongoing learning and professional development.

The NSE6_WCS-7.0 exam covers a wide range of topics related to cloud security in AWS, including network security, data protection, access control, and compliance. Candidates must have a thorough understanding of AWS architecture, security features, and best practices to pass NSE6_WCS-7.0 exam. NSE6_WCS-7.0 exam consists of multiple-choice questions and requires candidates to demonstrate their knowledge and skills in a time-bound manner.

Fortinet NSE6_WCS-7.0 Dumps PDF Are going to be The Best Score: https://www.prepawaypdf.com/Fortinet/NSE6_WCS-7.0-practice-exam-dumps.html

Related posts:

admin

You might also like

Leave a Reply Cancel reply