[May 16, 2022] Dumps Collection NSE5_FMG-6.4 Test Engine Dumps Training With 60 Questions [Q33-Q55]

Rate this post

[May 16, 2022] Dumps Collection NSE5_FMG-6.4 Test Engine Dumps Training With 60 Questions

Fortinet NSE5_FMG-6.4 Dumps – 100% Cover Real Exam Questions

NEW QUESTION 33
Refer to the exhibit.

Which statement about the object named ALL is true?

FortiManager updated the object ALL using the FortiGate value in its database.

FortiManager installed the object ALL with the updated value.

FortiManager created the object ALL as a unique entity in its database, which can be only used by this managed FortiGate.

FortiManager updated the object ALL using the FortiManager value in its database.

NEW QUESTION 34
Which two items are included in the FortiManager backup? (Choose two.)

FortiGuard database

Global database

Logs

All devices

NEW QUESTION 35
An administrator has enabled Service Access on FortiManager.
What is the purpose of Service Access on the FortiManager interface?

Allows FortiManager to download IPS packages

Allows FortiManager to respond to request for FortiGuard services from FortiGate devices

Allows FortiManager to run real-time debugs on the managed devices

Allows FortiManager to automatically configure a default route

NEW QUESTION 36
An administrator wants to delete an address object that is currently referenced in a firewall policy.
What can the administrator expect to happen?

FortiManager will not allow the administrator to delete a referenced address object

FortiManager will disable the status of the referenced firewall policy

FortiManager will replace the deleted address object with the none address object in the referenced firewall policy

FortiManager will replace the deleted address object with all address object in the referenced firewall policy

NEW QUESTION 37
An administrator has assigned a global policy package to custom ADOM1. Then the administrator creates a new policy package, Fortinet, in the custom ADOM1.
Which statement about the global policy package assignment to the newly-created policy package Fortinet is true?

When a new policy package is created, it automatically assigns the global policies to the new package.

When a new policy package is created, you need to assign the global policy package from the global ADOM.

When a new policy package is created, you need to reapply the global policy package to the ADOM.

When a new policy package is created, you can select the option to assign the global policies to the new package.

NEW QUESTION 38
What does a policy package status of Modified indicate?

FortiManager is unable to determine the policy package status

The policy package was never imported after a device was registered on FortiManager

The Policy configuration has been changed on a managed device and changes have not yet been imported into FortiManager

The Policy package configuration has been changed on FortiManager and changes have not yet been installed on the managed device.

NEW QUESTION 39
An administrator would like to create an SD-WAN using central management. What steps does the administrator need to perform to create an SD-WAN using central management?

First create an SD-WAN firewall policy, add member interfaces to the SD-WAN template and create a static route

You must specify a gateway address when you create a default static route

Remove all the interface references such as routes or policies

Enable SD-WAN central management in the ADOM, add member interfaces, create a static route and SDWAN firewall policies.

NEW QUESTION 40
View the following exhibit.

Given the configurations shown in the exhibit, what can you conclude from the installation targets in the Install On column?

The Install On column value represents successful installation on the managed devices

Policy seq#3 will be installed on all managed devices and VDOMs that are listed under Installation Targets

Policy seq#3 will be installed on the Trainer[NAT] VDOM only

Policy seq#3 will be not installed on any managed device

NEW QUESTION 41
Refer to the exhibit.

You are using the Quick Install option to install configuration changes on the managed FortiGate.
Which two statements correctly describe the result? (Choose two.)

It will not create a new revision in the revision history

It installs device-level changes to FortiGate without launching the Install Wizard

It cannot be canceled once initiated and changes will be installed on the managed device

It provides the option to preview configuration changes prior to installing them

NEW QUESTION 42
When an installation is performed from FortiManager, what is the recovery logic used between FortiManager and FortiGate for an FGFM tunnel?

After 15 minutes, FortiGate will unset all CLI commands that were part of the installation that caused the tunnel to go down.

FortiManager will revert and install a previous configuration revision on the managed FortiGate.

FortiGate will reject the CLI commands that will cause the tunnel to go down.

FortiManager will not push the CLI commands as a part of the installation that will cause the tunnel to go down.

NEW QUESTION 43
An administrator would like to create an SD-WAN default static route for a newly created SD-WAN using the FortiManager GUI. Both port1 and port2 are part of the SD-WAN member interfaces.
Which interface must the administrator select in the static route device drop-down list?

port2

virtual-wan-link

port1

auto-discovery

NEW QUESTION 44
What are two outcomes of ADOM revisions? (Choose two.)

ADOM revisions can significantly increase the size of the configuration backups.

ADOM revisions can save the current size of the whole ADOM

ADOM revisions can create System Checkpoints for the FortiManager configuration

ADOM revisions can save the current state of all policy packages and objects for an ADOM

NEW QUESTION 45
Which three settings are the factory default settings on FortiManager? (Choose three.)

Username is admin

Password is fortinet

FortiAnalyzer features are disabled

Reports and Event Monitor panes are enabled

port1 interface IP address is 192.168.1.99/24

NEW QUESTION 46
View the following exhibit.

If both FortiManager and FortiGate are behind the NAT devices, what are the two expected results? (Choose two.)

FortiGate is discovered by FortiManager through the FortiGate NATed IP address.

FortiGate can announce itself to FortiManager only if the FortiManager IP address is configured on FortiGate under central management.

During discovery, the FortiManager NATed IP address is not set by default on FortiGate.

If the FCFM tunnel is torn down, FortiManager will try to re-establish the FGFM tunnel.

NEW QUESTION 47
Which two statements about Security Fabric integration with FortiManager are true? (Choose two.)

The Security Fabric license, group name and password are required for the FortiManager Security Fabric integration

The Fabric View module enables you to generate the Security Fabric ratings for Security Fabric devices

The Security Fabric settings are part of the device level settings

The Fabric View module enables you to view the Security Fabric ratings for Security Fabric devices

NEW QUESTION 48
What will happen if FortiAnalyzer features are enabled on FortiManager?

FortiManager will reboot

FortiManager will send the logging configuration to the managed devices so the managed devices will start sending logs to FortiManager

FortiManager will enable ADOMs automatically to collect logs from non-FortiGate devices

FortiManager can be used only as a logging device.

NEW QUESTION 49
View the following exhibit.

Which one of the following statements is true regarding the object named ALL?

FortiManager updated the object ALL using FortiGate’s value in its database

FortiManager updated the object ALL using FortiManager’s value in its database

FortiManager created the object ALL as a unique entity in its database, which can be only used by this managed FortiGate.

FortiManager installed the object ALL with the updated value.

NEW QUESTION 50
An administrator has assigned a global policy package to a new ADOM called ADOM1. What will happen if the administrator tries to create a new policy package in ADOM1?

When creating a new policy package, the administrator can select the option to assign the global policy package to the new policy package

When a new policy package is created, the administrator needs to reapply the global policy package to ADOM1.

When a new policy package is created, the administrator must assign the global policy package from the global ADOM.

When the new policy package is created, FortiManager automatically assigns the global policy package to the new policy package.

NEW QUESTION 51
Refer to the exhibit.

An administrator logs into the FortiManager GUI and sees the panes shown in the exhibit.
Which two reasons can explain why the FortiAnalyzer feature panes do not appear? (Choose two.)

The administrator logged in using the unsecure protocol HTTP, so the view is restricted.

The administrator profile does not have full access privileges like the Super_User profile.

The administrator IP address is not a part of the trusted hosts configured on FortiManager interfaces.

FortiAnalyzer features are not enabled on FortiManager.

NEW QUESTION 52
Which two statements about the scheduled backup of FortiManager are true? (Choose two.)

It does not back up firmware images saved on FortiManager.

It can be configured using the CLI and GUI.

It backs up all devices and the FortiGuard database.

It supports FTP, SCP, and SFTP.

NEW QUESTION 53
An administrator with the Super_User profile is unable to log in to FortiManager because of an authentication failure message.
Which troubleshooting step should you take to resolve the issue?

Make sure FortiManager Access is enabled in the administrator profile

Make sure Offline Mode is disabled

Make sure the administrator IP address is part of the trusted hosts.

Make sure ADOMs are enabled and the administrator has access to the Global ADOM

NEW QUESTION 54
View the following exhibit, which shows the Download Import Report:

Why it is failing to import firewall policy ID 2?

The address object used in policy ID 2 already exist in ADON database with any as interface association and conflicts with address object interface association locally on the FortiGate

Policy ID 2 is configured from interface any to port6 FortiManager rejects to import this policy because any interface does not exist on FortiManager

Policy ID 2 does not have ADOM Interface mapping configured on FortiManager

Policy ID 2 for this managed FortiGate already exists on FortiManager in policy package named Remote-FortiGate.

NEW QUESTION 55
An administrator is replacing a device on FortiManager by running the following command:
execute device replace sn <devname> <serialnum>.
What device name and serial number must the administrator use?

Device name and serial number of the original device.

Device name and serial number of the replacement device.

Device name of the replacement device and serial number of the original device.

Device name of the original device and serial number of the replacement device.

Realistic PrepAwayPDF NSE5_FMG-6.4 Dumps PDF – 100% Passing Guarantee: https://www.prepawaypdf.com/Fortinet/NSE5_FMG-6.4-practice-exam-dumps.html

Related posts:

admin

You might also like

Leave a Reply Cancel reply